Hey Guys,
it gets worse and worse:
I cant even access the Bios anymore.
I accidentl switched on "Fast Boot" in the Bios. So from my understanding of "fast boot" the bios doenst check and external sources. There isnt even a Menu where i can choose to F2, F7 or F10.
It goes directly to this message: A bootable device has not been detected. Please refer to the Product at http://support.intel.com/support/motherboards/desktop/
So my next step was: Switch the Jumper to "Safe mode" (from Pin 1/2 to Pin 2/3) -> in the description it say that then the Bios should automaticly load - no reaction though - i get the same Message as schown above.
So i removed the BIOS Battery for 5-6 Minutes to clear the CMOS.
On the next Boot i get the message "CMOS Battery Voltage low etc." (apparently the CMOS was restored. But again : just the error message from above.
If i plug in a USB 2.0 Flash with a Ubuntu ISO (Boot worked befoere here) i get again the same Error.
Right now i dont know what to do to get this thing running Any suggestions ?
Wasnt the Bios Battery unplug long enough ? (5-6 Minutes)
Any Help gladly appriciated !
Cheers
Daniel