Does the Intel Centrino Wireless N 2230 card support BT on Linux?
I was looking to add an Intel wireless card to my new Intel Haswell NUC that is running Linux 3.17. Would the Intel Centrino Wireless N 2230 half-mini-PCIE card support bluetooth on Linux as well? (My...
View ArticleRe: Widi & Windows 8.1 problems
It is now 10 days, with countless hours spent unsuccessfully trying to connect my Lenovo t431s to my Toshiba L6363 TV using WIDI. Everything works fine on Lenovo T430s with windows 7 x64, but on my...
View ArticleRe: Automatic setting of date and time
Hi KurtE, The ntp package is not currently available on Edison image, it should be available in the future. A work around would be to build your custom image for Edison and include the ntp package.Take...
View ArticleRe: I can't connect my laptop to my lg tv
We are investigating further. Do you know the TV's firmware version?
View ArticleRe: dfu-util for Windows
Hi SergeyK, Thank you for your feedback. I am not sure which dfu-util version is the correct one, I will look into it and post back. Regards,Intel_Jesus
View ArticleRe: smbfs/cifs/nfs support on edison?
I just got my Edison today. I have to say that this little guy is impressive. The lack of documentation from Intel, however, is not. Daveman is right. There is currently no way I can see to transfer...
View ArticleClik here to view.
Re: smbfs/cifs/nfs support on edison?
You can transfer files to the Edison using scp. Adding NFS shouldn't be too difficult I wouldn't imagine. As for the configuration issues. I think most if not all of them have been fixed in the...
View ArticleEdison USB Host mode
Hi, I was wondering for the mini-breakout board is there anything special we need to do before using it in USB Host mode with an OTG cable? The reason I ask is because on the Arduino version there's a...
View ArticleHow to create a public key with gnupg
I'm trying to encrypt the password on Edison for email client. I installed gnugp and it seems working. But it requires me a Passphrase (but it did not wait for input) and cancels key generation as...
View ArticleRe: RTC 1307 - Real Time Clock
Hi mcabral,Yes, the information given by Johnnyfp was correct, you have to connect the + of the battery to V_VBAT_BKUP pin (pin23 on the edison, pin 5 of J18 on the mini breakout). You can check this...
View ArticleRe: I2C + LCD LCM1602 Problems
Hi again,In order to try and test the I2C bus I connected A4 and A5 of the Edison into ports A0 and A1 of an Arduino Mega.It constantly read values between 927 and 931 for both ports. However, when I...
View ArticleRe: Design for a 3D printed Edison Case
Does it work now? It downloads fine for me, but that might just be an internal vs. external URL issue.If it's still not working, you can find the stl on...
View ArticleRe: Disabling "Restore defaults" ctrl+alt+F8
I’m sorry Nyuriks, but which device drive would you like to install?
View ArticleRe: NUC Boots up on its Own
Ok, let me know what happens to the NUC while using BIOS v0026. Have you tried using the NUC without a network card?
View ArticleRe: Is Rapid Storage Technology RAID compatible with TLER-aware disks like...
Hello!Thank you for very comprehensive introduction. Let’s consider two scenario ( both with TLER-capable hard drives):Let CRITICAL_ERROR means unrecoverable error code message that leads to disk...
View ArticleRe: HD4600 resolution problem with HP LA2405x monitor
Same problem here with a new HP ProDesk 600 G1 SFF PC and an old NEC MultiSync LCD 2690WUXi that looks best at 1920 x 1200. The HP system board is based on Haswell architecture and has an HD4600...
View ArticleClik here to view.
Re: IWGAud_Device_06 not found while updating drivers during WiDi Update....
Kindly provide the following:Intel® System Identification Utility or msinfo32 report (press Windows* key + R key, type “msinfo32”, press OK and then File, Export) or both.Installation logs. You may...
View ArticleSerial Monitor over Bluetooth?
Hi Guys, did anyone get a serial interface via BT?Or is this not supported at the current stage? Thanks for your help!
View ArticleRe: Event Viewer: irstrtsv error: Unable to read LBA sector via passthru
I havenotseena loss of performance, but I would like to knowwhy theerror messageisrepetreevery 3minutes, andif it'spossible tosolve it. Thank youfor your helpAllan.
View ArticleEdison w/ Arduino Expansion board no longer boot with 12V supply
After updating the Edison firmware image, my Edison no longer boot with the 12V supply. It will boot when powered by USB.What's going on? How do I get back to the previous state?
View Article