Re: Windows peripherals non-responsive upon Linux reboot
Thanks for the information Mannamighty. Please provide me with the following information: Model number of the keyboard and mouse you are using? Which Linux distro do you have installed?Which kernel...
View ArticleRe: meta-edison layers as git repos?
Hi,What I meant to say was that there are no official Intel repositories available. You can still use the repos available in different websites to customize your kernel...
View ArticleRe: Galileo - How to get both Full Linux and a USB WiFi adapter working?
Copying files to the root of SD Card is a common way. SD card booting problem depends on a SW version installed on a board and a configuration of SD card files.As the first step I recommend you to...
View ArticleRe: GEN2 Linux + Dev Tools SD Card image anyone?
Hi SpiderKenny, I’m using the SD-Card Linux Image from this site Galileo Software Downloads and adding some packages from...
View Articleno esta disponible Driver Update Utility version 1
no esta disponible Driver Update Utility version 1 no funciona te manda de nuevo a la lista de descargas
View ArticleClik here to view.
Re: Intel HD-series Contrast Problem... blooming / overly bright areas - How...
Hi Ltek Could you post the DX Diag reports for both the systems with this issue?Does the issue occur when you connect to a LCD type display or only on the projector?Also, what model of DLP Projector...
View ArticleClik here to view.
Re: write error: No space left on device
I second what mhahn said earlier. I have lots of those hex journal directories, but I have only done maybe 2 or 3 OTA updates to the firmware. I discovered my root partition was full only when the...
View ArticleRe: Trim Support in Raid 0 but not Raid 1?
Hi joe_intel, It has been quite some time since your post. Is there any update for TRIM support in RAID1 arrays? Will TRIM be supported in RAID1 with newer drivers perhaps?
View ArticleRe: Yocto - IMAGE_INSTALL not being read
That seems to have worked. I'd still like to know why it doesn't work with the += syntax as it should. Thanks
View ArticleRe: Native Edison kernel compile successful, kernel hangs without error
Did you try to build the kernel this way without xenomai patches ? Just to be sure that your procedure works basically.
View ArticleRe: Intel Galileo 1 unidentified component half-broken
In my understanding this is a 32.768 KHz oscillator. Part number: FC-255 32.7680K-A0Manufacturer: Epson Toyocom Corporation Look it there...
View ArticleRe: WiDi does not find Push2TV Adapter, no upgrade to WiDi Software 4.2.29.0...
Most of the times the Windows* Firewall already has the exceptions added when you install the software. The other files might need to be added with third party firewalls. So, I believe in your case the...
View ArticleClik here to view.
How does your Galileo looks like?
Hi, if you have an interesting configuration of your Galileo board, could you please post a photo?
View ArticleRe: Edison w/ Arduino Expansion board no longer boot with 12V supply
Yes same thing happened to me here. In the hardware guide it says"When power is applied to J1 or VIN, the external power must be in the range of 7 to 17 V. The power is converted to 5 V via a...
View ArticleRe: Access Edison mass-storage from within Edison
Hello Dave,I understand both Windows and Linux can't access or have the drive mounted at the same time. Unfortunately the behaviour I am experiencing is the opposite of what you just described. That...
View ArticleRe: Graphics problem.
Hi, Well would you believe it, I tried. I tried to return it by returning under the 14 day distance selling regulations, and also because it was not as advertised, but the seller advised eBay he would...
View ArticleClik here to view.
Re: 530 Raid 0 - 180gb
We have confirmed that you should not need to break the RAID to do a firmware update unless the drives are attached to an add-in RAID controller. You can update the firmware while they are attached to...
View ArticleRe: Bluetooth Joysticks? PS3? XBox 360?
That is one possibility. So far I have been able to build the program to be able to pair the controller with the machine, but have not yet patched the kernel to make it work with it. Since I am...
View ArticleTime.h returns 1970, but Edison says 2014
I have verified by using putty to check the time on the board, It is getting set by ntp and shows 11/08/2014. When I use time.h in my sketch this returns 1970 char...
View ArticleRe: DH87RL - fan issue
Scott, it's me again - after "some" time I'fe found the spare time to test the fan control with the information given by you. To make it shot: No change at allCPU fan still responses to the CPU temp as...
View Article