Re: Intel Edison USB host mode
I disabled in /etc/network/interfaces the usb iface used for ethernet (192.168.2.15) because i don't need it. Could it be a reason for your problem (i'm not sure) ?
View ArticleRe: Application Running On Powerup
You can also try to replace "network.target" by "network.service". I do so on my Archlinux pc's and it works fine.
View ArticleRe: How do I build a new Edison kernel?
You can download this file::Intel® Download Center It is the complete Yocto package and includes also the kernel sources and patches.Good luck!
View ArticleRe: DCCP847DYE mSATA not recognized after Ubuntu 10.04 install
Sorry took so long for a reply here. Secure erase did not work. I did some crazy reset thing where you let the system sit in the BIOS for like 20-30 minutes, once or twice (can't remember the whole...
View ArticleClik here to view.
Re: Edison Driver Setup 1.0.0 dows not install on Windows 10
I resolved it. Might not need all steps, but this worked for me. Using Windows 10 Build 9879.Right mouse click on Edison Driver Setup 1.0.0 and select Properties from the context menu.Click...
View ArticleEdison Driver Setup 1.0.0 dows not install on Windows 10
As developers moved to Windows 10 and Visual Studio 2015, please update the Edison Driver Setup to be compatible with Windows 10.Also make IDE available on Visual Studio 2015 to keep Intel Edison...
View ArticleClik here to view.
Re: DCCP847DYE mSATA not recognized after Ubuntu 10.04 install
Hey Joe, sorry, didn't even see your last message. No, the drives are no longer recognized in the BIOS. These are the same Crucial SSD's. I have an ADATA drive here that I could test with. The Crucial...
View ArticleRe: Having trouble connecting wifi to gen 2
Sorry for the late reply. I dont have my gen 2 board to try and change the MAC address.
View ArticleRe: Trouble getting started with Edison and the Mini breakout board
xfstk is an Intelligent tool and can be downloaded and built from the internet. That said you might not need it - there is a thread within this forum showing how you can run flashall --recovery without...
View ArticleRe: add mysql on edison
If you don't mind a Toto rebuild you can use the method described elsewhere in this forum. I do have 2G roots size with that...
View ArticleRe: add mysql on edison
Hi mhahn, Can you tell me how to do it ? Thank you! Regards, wumf
View ArticleRe: Trouble getting started with Edison and the Mini breakout board
Yup, I saw that .I will have a try.Thank you so much.
View ArticleRe: flashall.sh changes to allow re-partitioning without xFSTK
Is it type wrong? "partiton" or "partition"?
View ArticleClik here to view.
Do you want to allow the following program to make changes to this computer?...
I know there is an Intel exe by that name that is appropriate for my computer, but I've never been asked before. When I "open the application" for details, the details indicate that the certificate...
View ArticleRe: How best proceed with overheating i7-4790K?
jfig04-I have the same motherboard as you, but get much higher temps. Are you using stock cooler, or something else. Let me know, as I'll get whatever you have. Your temps appear great!Got a batch...
View ArticleA disk read error occurred - D54250WYK
Hi, I put together an D54250WYK with an Intel SSD 520 120GB, running Windows 8.1. It's around a month old. Ever so often on reboot, it will fail on startup with the text-mode error "A disk read error...
View ArticleRe: How best proceed with overheating i7-4790K?
I've found that using X.M.P Profile settings on my 2400 DDR makes idle at 13W according to CoreTemp. Without XMP, 4W and idle cores at 30º-35ºC which is good. Instead of XMP profile, I choose to set...
View Article