Re: Where is the device tree?
The device tree may come from the SFI tables which are usually provided by the BIOS on a computer. I don't know where to find it for the Galileo or the Edison though.See this post: Edison FW SFI Tables
View ArticleRe: Intel NUC D54250WYKH with PNY XLR8 SSD - SSD is not getting detected,...
Go to BIOS, Devices, Hard Disk Pre-Delay. Increase the value and check for results.
View ArticleRe: Edison incorrectly stating a disk size of 536.9MB. I cannot add yocto...
Hi JPMonetero, Sorry, I tried updating the original post, but it had not been approved by a moderator, and I couldn't. I was able to resolve the issue by reflashing. If anyone else has similar...
View ArticleRe: IGFX Display Driver Error and Restored Windows Vista HP 64
Thanks Joe; Your hints are v ery helpful. The first driver you posted is the one I installed trying to resolve the issue...winvista64_15124.exe.I also downloaded the HP last driver,,sp36395.exe..but is...
View ArticleD54250WYK 3D Playback Issues
Hello, I have been using my NUC as an HTPC for months but have not had any luck playing 3D content. The NUC does not seem to output a 3D signal or send a 3D signal to my television to tell it to switch...
View ArticleRe: Can’t run Adobe premiere pro CC 2014 with Intel HD 5000 driver
No. I have installed this driver version and I get the same behavior. A pop up message that the program has stopped working ...
View ArticleClik here to view.
Re: J1900 Processor and HD Bitstream
The better Answer would be: I don't have an Answer from our engeneering team so far, but i will ask one more time
View ArticleRe: Does Intel support SFP+ optics with dual RX?
Hi IgalM, Thank you for the post. can you provide what is the Intel network adapter and SFP+ optics you used? thanks,wb
View ArticleClik here to view.
Re: Webpage to arduino ide communication
Okay, I've got something clean nowDropbox - ArduinoWebControl Here what it looks like on my iPhone. Clicking on the toggle switch turn the on-board LED on/off.
View ArticleHow to test if i2c hardware is there without segmentation fault
I have a project that may or may not have a i2c device connected. It is optional. I would like to detect if it is there or not so I don't crash the system making calls that won't work. I tried...
View ArticleClik here to view.
can not install windows server 2012 on intel server board s5500ur
hello every oneI changed the bios to this setting :mass storage controller configuration :intel SAS RAID module : disabledonboard SATA controller : enabledSATA Mode : SW RAIDI have 2 hard that is...
View ArticleRe: Does Intel support SFP+ optics with dual RX?
Dear Intel support,Thank you for your answer,We are using Intel X520 Adapters : Intel® Ethernet Converged Network Adapter X520 Product Familyand managing them using DPDK.Regards, Igal.
View ArticleRe: can not install windows server 2012 on intel server board s5500ur
You will get a better response in the Servers forum.I have moved your post there. Doc
View ArticleRe: Can you please present yourself?
Hi,My name is Bar,I'm Undergraduate B.Sc - computer science in Tel Aviv University.I would really like to get into Edison world, which gives me lots of opportunities as young developer.
View Articleproblems in building the image of the edison
hello,everyone!When I build the image of the edison board,I meet some problems.My os is Ubuntu14.04.The errors are...
View ArticleRate limiting on Virtual Function
Hi,I am using Intel 10 Gig Dual-Port Ethernet PCI Card (BN8110470) ixgbe driver on Ubuntu 14.04 Host.I was able to create VF's which are listed below from lspci command: 02:00.0 Ethernet controller:...
View ArticleClik here to view.
External Power adaptor for Intel Edison breakout board
I have a power adaptor of 12 V, 1.25 A. Can it be used for Intel Edison beakout board? Please confirm the maximum current that can be supplied to Intel Edison breakout board.
View ArticleRe: ** B0100000063f694 error
Hi all, i also see the crash error **B0100000063f694 in my serial console. I am only using the softwareserial library. below is my sketch for the setup and loop. //Initvoid setup() { delay(5000);...
View ArticleRe: Intel Storage Manager (AHCI) and Windows 7 32bit not working
Thank you Allan, unfortunately it's still the same outcome.Before all of this, I had a 350 GB HDD and 100% working (and still is).Now it's a new HDD, to be more specific: WDC10JPVX-22JC3T0 ATA I can't...
View ArticleClik here to view.
Re: no response in serial console
Hi rgb, I have adopted your suggestion in a new sketch and upload to my galileo gen 2. The serial print is working fine even at delay(1000). however when i delay the time in my sketch, the serial...
View Article