Okay I need to be a little bit more specific about what programs I am using that makes these heat spikes.

Besides the stress test (Which I am well aware of makes the temp rise a lot) I have used Windows Update, Installing Intels own drivers, Office 2016, VLC player, Cyberlink PowerDVD 16, (Watching movies from 480p to 1080p), Extracted files with

WinRAR. All of these programs makes the temperature rise to around 93 degrees celsious. And yes you say that, as long  as cpu temp stays below the 100 C it will be fine.

I think that there is two problems in that answer. One is that, because of the temp rising like it does, the NUC makes A LOT of noise and seriouly, you can't really open a program without the fan starting up, even though it is a small program, which doesn't make that much use of the cpu. I have tried to deactivate the Turbo Boost in the BIOS and this has makes it a little bit more "bearable". It still reaches 87 C from time to time and at idle it goes down to around 52 C. My Desktop has an Intel 5930K I7 cpu installed. When it is idle it is around 39 C. Even though the difference in the form factor in my NUC and my desktop is big I still think that the difference in the two PC's are too much. I shouldn't be forced to deactivate the turbo, to make the NUC work a bit better, when it should be working properly from the start and with the turbo boost turned on. Why pay for something that you in the end need to deactivate, to make it work better???

The other thing that I think is wrong with that answer, that you gave me, is, what about the NUC's lifespan? We know for a fact that heat is something that wears down all kinds of electronic parts, I really don't think that this cpu is going to last that long with those temperatures. Ireally do hope that Intel is able to fix this problem, because more and more people seems to be having these problems with the 7th gen processors.

Even though you say that 93 C is "fine", I disagree. It is only 7 C from the 100 C which is the limit. That in my eyes is NOT "fine"

Intel Responds to Core i7-7700K Overheating Issue, Cluelessly Suggests We Stop Overclocking - ExtremeTech

Regards

Pete

Following are some quick fixes to your issue:

• Power cycle your modem
• Reset your modem to its factory default settings.
• Update your firmware
• Reset your browser.Restore its default settings.Delete temporary files and cookies.Clear the history and cache.
• If all your devices are experiencing problems with the internet connection, turn your attention to your router. The first thing to try isn't very technical: turn it off and back on again. Rebooting the router fixes connection problems a surprisingly high proportion of the time

I hope these tips will resolve the issue if not? Then approach to Lenovo Thinkpad T61 Manual and do what the experts suggests on this.

Hi rahulmodi8812,

Yocto Linux is the only OS supported by Intel, so I think you will not receive much help in this forum, I think. Since you are using a port of Debian, you should ask for help to those promoting the OS distribution (such as the one in the blog you mentioned) or even the port author explicitly referred to in the blog post you sent the link in your post.

BR,

Fernando.

Hello Simone,

We are wondering if you were able to configure the RAID 0 by following our suggestions.

Please let us know of the outcome and if further assistance is required.

Best regards, 
Caesar B.

Hi Xtopher757,

The situation with the 32GB modules is that for some reason are out of stock. We have asked this and we hope all of our resellers have them available soon. Unfortunately, there is no ETA for these ones yet, but hopefully, they can get those in the next days.

You can also pre-order the module and as soon as the become available, they will ship it to you.

Regards,
Nestor C

What have you done to "unblock" the fan you blocked?

Are any of the wiring from the power supply blocking the fan blades?

Have you replaced the fan?

Is the fan still functional (working)?

What makes you think there is data corruption?

Doc

Hi,

I have an Intel 4770K with stock heatsink (low profile).  After moving stuff in the PC something has dislodged and blocked the fan on the cooler.   This has caused the CPU to sit around 84-90C.   This was discovered about 24 hours later when I went to plug in a new drive and saw the CPU fan wasn't running - which lead me to check the ASUS monitoring software.

I have some very important stuff on the PC - and I made a lot of changes to my files in that time frame.   If in theory -- the PC was running at it's thermal threshold, what is the likelihood my data could suffer corruption?

Thanks - M

I was following this tutorial to connect a bluetooth speaker on startup :GitHub - maestr0/intel-edison: Basic shell scripts for my Intel Edison

I changed the MAC address in the script file to the one of my speaker and rebooted the edison. Now the edison fails to connect to the speaker and is stuck on boot. When the connection fails, the edison reboots again. Is there any way to remove the script or boot?

Any help is appreciated!

Thanks

Can one disable uefi secure boot on NUC 7th gen ?   Secure boot makes it impossibly to test diff monitor drivers on windows 10

Trying to do EDID override to check if I can change tv/monitor driver ->enable 10bit colordepth  YUV422  see if windows 10 HDR option would kick in..

im sending boot log ------>

[    0.000000] Initializing cgroup subsys cpuset

[    0.000000] Initializing cgroup subsys cpu

[    0.000000] Initializing cgroup subsys cpuacct

[    0.000000] Linux version 4.4.41-yocto-standard (root123@procubed) (gcc version 5.4.0 (GCC) ) #1 SMP PREEMPT Tue May 2 17:50:15 IST 2017

[    0.000000] Command line: rootwait console=tty0 console=ttyS2,115200 video=efifb maxcpus=4 noxsave reboot=efi kmemleak=off fsck.mode=skip panic=5 no-ima security=none ro root=PARTUUID=12345678-9abc-def0-

[    0.000000] x86/fpu: xstate_offset[3]:  960, xstate_sizes[3]:   64

[    0.000000] x86/fpu: xstate_offset[4]: 1024, xstate_sizes[4]:   64

[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'

[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'

[    0.000000] x86/fpu: Supporting XSAVE feature 0x08: 'MPX bounds registers'

[    0.000000] x86/fpu: Supporting XSAVE feature 0x10: 'MPX CSR'

[    0.000000] x86/fpu: Enabled xstate features 0x1b, context size is 1088 bytes, using 'standard' format.

[    0.000000] x86/fpu: Using 'eager' FPU context switches.

[    0.000000] e820: BIOS-provided physical RAM map:

[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable

[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable

[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable

[    0.000000] BIOS-e820: [mem 0x0000000010000000-0x0000000012550fff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000012551000-0x0000000078982fff] usable

[    0.000000] BIOS-e820: [mem 0x0000000078983000-0x0000000078dabfff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000078dac000-0x0000000078e0bfff] ACPI NVS

[    0.000000] BIOS-e820: [mem 0x0000000078e0c000-0x0000000078e4bfff] ACPI data

[    0.000000] BIOS-e820: [mem 0x0000000078e4c000-0x0000000079df2fff] usable

[    0.000000] BIOS-e820: [mem 0x0000000079df3000-0x0000000079df3fff] ACPI NVS

[    0.000000] BIOS-e820: [mem 0x0000000079df4000-0x0000000079e1dfff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000079e1e000-0x000000007b3fffff] usable

[    0.000000] BIOS-e820: [mem 0x000000007b400000-0x000000007fffffff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable

[    0.000000] NX (Execute Disable) protection: active

[    0.000000] efi: EFI v2.50 by EDK II

[    0.000000] efi:  ACPI=0x78e4b000  ACPI 2.0=0x78e4b014  ESRT=0x78d80000  SMBIOS=0x78b63000  SMBIOS 3.0=0x78b61000  PROP=0x790843d0

[    0.000000] efi: requested map not found.

[    0.000000] esrt: ESRT header is not in the memory map.

[    0.000000] SMBIOS 3.0.0 present.

[    0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000

[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT

[    0.000000] e820: last_pfn = 0x7b400 max_arch_pfn = 0x400000000

[    0.000000] Scanning 1 areas for low memory corruption

[    0.000000] Using GB pages for direct mapping

[    0.000000] RAMDISK: [mem 0x783b6000-0x78982fff]

[    0.000000] ACPI: Early table checksum verification disabled

[    0.000000] ACPI: RSDP 0x0000000078E4B014 000024 (v02 INTEL )

[    0.000000] ACPI: XSDT 0x0000000078E28188 0000F4 (v01 INTEL  EDK2     00000003 BRXT 01000013)

[    0.000000] ACPI: FACP 0x0000000078E42000 00010C (v05 INTEL  EDK2     00000003 BRXT 0100000D)

[    0.000000] ACPI: DSDT 0x0000000078E36000 007082 (v02 INTEL  EDK2     00000003 BRXT 0100000D)

[    0.000000] ACPI: FACS 0x0000000078E09000 000040

[    0.000000] ACPI: UEFI 0x0000000078E0B000 000042 (v01 INTEL  EDK2     00000002 BRXT 01000013)

[    0.000000] ACPI: DBG2 0x0000000078E49000 000072 (v00 INTEL  EDK2     00000003 BRXT 0100000D)

[    0.000000] ACPI: HPET 0x0000000078E47000 000038 (v01 INTEL  EDK2     00000003 BRXT 0100000D)

[    0.000000] ACPI: LPIT 0x0000000078E46000 00005C (v01 INTEL  EDK2     00000003 BRXT 0100000D)

[    0.000000] ACPI: APIC 0x0000000078E45000 000084 (v03 INTEL  EDK2     00000003 BRXT 0100000D)

[    0.000000] ACPI: MCFG 0x0000000078E44000 00003C (v01 INTEL  EDK2     00000003 BRXT 0100000D)

[    0.000000] ACPI: NPKT 0x0000000078E43000 000065 (v01 INTEL  EDK2     00000003 BRXT 0100000D)

[    0.000000] ACPI: PRAM 0x0000000078E41000 000030 (v01 INTEL  EDK2     00000003 BRXT 0100000D)

[    0.000000] ACPI: SSDT 0x0000000078E3E000 002769 (v02 INTEL  DptfTab  00000003 BRXT 0100000D)

[    0.000000] ACPI: SSDT 0x0000000078E35000 000A5D (v02 INTEL  RVPRtd3  00000003 BRXT 0100000D)

[    0.000000] ACPI: SSDT 0x0000000078E34000 00023E (v02 INTEL  UsbCTabl 00000003 BRXT 0100000D)

[    0.000000] ACPI: SSDT 0x0000000078E30000 0036A8 (v01 Intel_ Platform 00001000 INTL 20150818)

[    0.000000] ACPI: SSDT 0x0000000078E2F000 0003CA (v01 INTEL  EprmSdt0 00001000 INTL 20150818)

[    0.000000] ACPI: EM_1 0x0000000078E2D000 000029 (v00 INTEL  OEM1     00000005 INTL 0100000D)

[    0.000000] ACPI: OEM1 0x0000000078E2C000 000040 (v01 INTEL  ENRGYMGT 00000005 INTL 0100000D)

[    0.000000] ACPI: PIDV 0x0000000078E2B000 0000DC (v02                 00000002 BRXT 0100000D)

[    0.000000] ACPI: RSCI 0x0000000078E2A000 000030 (v02 INTEL  BOOTSRC  00000001 BRXT 0100000D)

[    0.000000] ACPI: SSDT 0x0000000078E2E000 0004A5 (v02 PmRef  Cpu0Ist  00003000 INTL 20150818)

[    0.000000] ACPI: SSDT 0x0000000078E29000 00072B (v02 CpuRef CpuSsdt  00003000 INTL 20150818)

[    0.000000] ACPI: SSDT 0x0000000078E4A000 00032D (v02 PmRef  Cpu0Tst  00003000 INTL 20150818)

[    0.000000] ACPI: SSDT 0x0000000078E27000 00017C (v02 PmRef  ApTst    00003000 INTL 20150818)

[    0.000000] ACPI: SSDT 0x0000000078E24000 002865 (v02 SaSsdt SaSsdt   00003000 INTL 20150818)

[    0.000000] ACPI: FPDT 0x0000000078E23000 000044 (v01 INTEL  EDK2     00000002 BRXT 01000013)

[    0.000000] ACPI: WDAT 0x0000000078E48000 000104 (v01                 00000000      00000000)

[    0.000000] ACPI: NHLT 0x0000000078E21000 001CB1 (v00 INTEL  EDK2     00000002 BRXT 01000013)

[    0.000000] Zone ranges:

[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]

[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]

[    0.000000]   Normal   [mem 0x0000000100000000-0x000000017fffffff]

[    0.000000] Movable zone start for each node

[    0.000000] Early memory node ranges

[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]

[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009dfff]

[    0.000000]   node   0: [mem 0x0000000000100000-0x000000000fffffff]

[    0.000000]   node   0: [mem 0x0000000012551000-0x0000000078982fff]

[    0.000000]   node   0: [mem 0x0000000078e4c000-0x0000000079df2fff]

[    0.000000]   node   0: [mem 0x0000000079e1e000-0x000000007b3fffff]

[    0.000000]   node   0: [mem 0x0000000100000000-0x000000017fffffff]

[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff]

[    0.000000] Reserving Intel graphics stolen memory at 0x7c000000-0x7fffffff

[    0.000000] ACPI: PM-Timer IO Port: 0x408

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])

[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)

[    0.000000] Using ACPI (MADT) for SMP configuration information

[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000

[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs

[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices

[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns

[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1

[    0.000000] PERCPU: Embedded 31 pages/cpu @ffff88017fc00000 s90072 r8192 d28712 u524288

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1002267

[    0.000000] Kernel command line: rootwait console=tty0 console=ttyS2,115200 video=efifb maxcpus=4 noxsave reboot=efi kmemleak=off fsck.mode=skip panic=5 no-ima security=none ro root=PARTUUID=12345678-9ab

[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)

[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)

[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)

[    0.000000] Memory: 3844652K/4072796K available (9159K kernel code, 1243K rwdata, 3048K rodata, 1272K init, 596K bss, 228144K reserved, 0K cma-reserved)

[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1

[    0.000000] Preemptible hierarchical RCU implementation.

[    0.000000]  Build-time adjustment of leaf fanout to 64.

[    0.000000]  RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.

[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4

[    0.000000] NR_IRQS:4352 nr_irqs:1024 16

[    0.000000] Console: colour dummy device 80x25

[    0.000000] console [tty0] enabled

[    0.000000] console [ttyS2] enabled

[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns

[    0.000000] tsc: PIT calibration matches HPET. 1 loops

[    0.000000] tsc: Detected 1689.653 MHz processor

[    0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3379.20 BogoMIPS (lpj=1689600)

[    0.000935] pid_max: default: 32768 minimum: 301

[    0.001336] ACPI: Core revision 20150930

[    0.024434] ACPI: 11 ACPI AML tables successfully acquired and loaded

[    0.027224] Security Framework initialized

[    0.027621] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)

[    0.028184] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)

[    0.029090] Initializing cgroup subsys io

[    0.029439] Initializing cgroup subsys memory

[    0.029853] Initializing cgroup subsys devices

[    0.030234] Initializing cgroup subsys freezer

[    0.030647] Initializing cgroup subsys net_cls

[    0.031028] Initializing cgroup subsys debug

[    0.031456] CPU: Physical Processor ID: 0

[    0.031831] CPU: Processor Core ID: 0

[    0.044080] mce: CPU supports 7 MCE banks

[    0.044489] CPU0: Thermal monitoring enabled (TM1)

[    0.044974] process: using mwait in idle threads

[    0.045370] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0

[    0.045856] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0

[    0.049308] Freeing SMP alternatives memory: 36K (ffffffff81e65000 - ffffffff81e6e000)

[    0.053361] ftrace: allocating 33702 entries in 132 pages

[    0.114679] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1

[    0.125218] smpboot: CPU0: Intel(R) Atom(TM) Processor T5700 @ 1.70GHz (family: 0x6, model: 0x5c, stepping: 0x2)

[    0.126146] Performance Events: PEBS fmt3+, generic architected perfmon, full-width counters, Intel PMU driver.

[    0.127059] ... version:                4

[    0.127402] ... bit width:              48

[    0.127753] ... generic registers:      4

[    0.128096] ... value mask:             0000ffffffffffff

[    0.128543] ... max period:             00007fffffffffff

[    0.128993] ... fixed-purpose events:   3

[    0.129335] ... event mask:             000000070000000f

[    0.138065] x86: Booting SMP configuration:

[    0.138425] .... node  #0, CPUs:      #1 #2 #3

[    0.181345] Skipped synchronization checks as TSC is reliable.

[    0.181892] x86: Booted up 1 node, 4 CPUs

[    0.182242] smpboot: Total of 4 processors activated (13516.80 BogoMIPS)

[    0.186111] devtmpfs: initialized

[    0.187000] PM: Registering ACPI NVS region [mem 0x78dac000-0x78e0bfff] (393216 bytes)

[    0.187673] PM: Registering ACPI NVS region [mem 0x79df3000-0x79df3fff] (4096 bytes)

[    0.188419] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns

[    0.189357] xor: measuring software checksum speed

[    0.199366]    prefetch64-sse:  8828.000 MB/sec

[    0.209387]    generic_sse:  7620.000 MB/sec

[    0.209751] xor: using function: prefetch64-sse (8828.000 MB/sec)

[    0.210295] pinctrl core: initialized pinctrl subsystem

[    0.211091] NET: Registered protocol family 16

[    0.215767] cpuidle: using governor ladder

[    0.219781] cpuidle: using governor menu

[    0.220317] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it

[    0.220963] ACPI: bus type PCI registered

[    0.221427] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)

[    0.222210] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820

[    0.222787] PCI: Using configuration type 1 for base access

[    0.246339] raid6: sse2x1   gen()  3699 MB/s

[    0.263372] raid6: sse2x1   xor()  2238 MB/s

[    0.280404] raid6: sse2x2   gen()  4265 MB/s

[    0.297448] raid6: sse2x2   xor()  2623 MB/s

[    0.314487] raid6: sse2x4   gen()  4898 MB/s

[    0.331525] raid6: sse2x4   xor()  2277 MB/s

[    0.331890] raid6: using algorithm sse2x4 gen() 4898 MB/s

[    0.332347] raid6: .... xor() 2277 MB/s, rmw enabled

[    0.332773] raid6: using ssse3x2 recovery algorithm

[    0.333280] ACPI: Added _OSI(Module Device)

[    0.333639] ACPI: Added _OSI(Processor Device)

[    0.334023] ACPI: Added _OSI(3.0 _SCP Extensions)

[    0.334424] ACPI: Added _OSI(Processor Aggregator Device)

[    0.342931] ACPI: Executed 5 blocks of module-level executable AML code

[    0.349443] ACPI: Dynamic OEM Table Load:

[    0.349830] ACPI: SSDT 0xFFFF88017B3AA200 000102 (v02 PmRef  Cpu0Cst  00003001 INTL 20150818)

[    0.351859] ACPI: Dynamic OEM Table Load:

[    0.352244] ACPI: SSDT 0xFFFF88017B3AA400 00015F (v02 PmRef  ApIst    00003000 INTL 20150818)

[    0.354045] ACPI: Dynamic OEM Table Load:

[    0.354429] ACPI: SSDT 0xFFFF88017B3A20C0 00008D (v02 PmRef  ApCst    00003000 INTL 20150818)

[    0.357213] ACPI: Interpreter enabled

[    0.357553] ACPI: (supports S0 S5)

[    0.357849] ACPI: Using IOAPIC for interrupt routing

[    0.358324] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug

[    0.359876] ACPI: Power Resource [PXP] (on)

[    0.377748] ACPI: Power Resource [PXP] (on)

[    0.399631] ACPI: Power Resource [VANA] (off)

[    0.400067] ACPI: Power Resource [VDIG] (off)

[    0.400511] ACPI: Power Resource [VAF] (off)

[    0.400937] ACPI: Power Resource [VIO] (off)

[    0.402015] ACPI: Power Resource [VANA] (off)

[    0.402459] ACPI: Power Resource [VDIG] (off)

[    0.402894] ACPI: Power Resource [VAF] (off)

[    0.413233] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])

[    0.413773] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]

[    0.415068] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]

[    0.415741] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration

[    0.416438] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge

[    0.417479] PCI host bridge to bus 0000:00

[    0.417834] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]

[    0.418355] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]

[    0.418932] pci_bus 0000:00: root bus resource [io  0x0078-0x03ff window]

[    0.419504] pci_bus 0000:00: root bus resource [io  0x0480-0x0cf7 window]

[    0.420076] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]

[    0.420648] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]

[    0.421280] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]

[    0.421910] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]

[    0.422544] pci_bus 0000:00: root bus resource [mem 0x7c000001-0x7fffffff window]

[    0.423171] pci_bus 0000:00: root bus resource [mem 0x80000000-0xcfffffff window]

[    0.423803] pci_bus 0000:00: root bus resource [bus 00-ff]

[    0.425973] pci 0000:00:0e.0: System wakeup disabled by ACPI

[    0.427238] pci 0000:00:14.0: System wakeup disabled by ACPI

[    0.428121] pci 0000:00:15.0: System wakeup disabled by ACPI

[    0.428979] pci 0000:00:15.1: System wakeup disabled by ACPI

[    0.436068] pci 0000:01:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug

[    0.439008] pci 0000:00:14.0: PCI bridge to [bus 01]

[    0.445501] vgaarb: setting as boot device: PCI:0000:00:02.0

[    0.445989] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none

[    0.446684] vgaarb: loaded

[    0.446923] vgaarb: bridge control possible 0000:00:02.0

[    0.447536] SCSI subsystem initialized

[    0.447982] ACPI: bus type USB registered

[    0.448359] usbcore: registered new interface driver usbfs

[    0.448837] usbcore: registered new interface driver hub

[    0.449320] usbcore: registered new device driver usb

[    0.449819] pps_core: LinuxPPS API ver. 1 registered

[    0.450240] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>

[    0.451014] PTP clock support registered

[    0.458718] Advanced Linux Sound Architecture Driver Initialized.

[    0.459255] PCI: Using ACPI for IRQ routing

[    0.466977] Bluetooth: Core ver 2.21

[    0.467296] NET: Registered protocol family 31

[    0.467676] Bluetooth: HCI device and connection manager initialized

[    0.468218] Bluetooth: HCI socket layer initialized

[    0.468633] Bluetooth: L2CAP socket layer initialized

[    0.469068] Bluetooth: SCO socket layer initialized

[    0.469809] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0

[    0.470478] hpet0: 8 comparators, 64-bit 19.200000 MHz counter

[    0.473015] amd_nb: Cannot enumerate AMD northbridges

[    0.473470] clocksource: Switched to clocksource hpet

[    0.485417] pnp: PnP ACPI init

[    0.486799] system 00:01: [mem 0xe0000000-0xefffffff] could not be reserved

[    0.487384] system 00:01: [mem 0xfea00000-0xfeafffff] has been reserved

[    0.487964] system 00:01: [mem 0xfed01000-0xfed01fff] has been reserved

[    0.488543] system 00:01: [mem 0xfed03000-0xfed03fff] has been reserved

[    0.489099] system 00:01: [mem 0xfed06000-0xfed06fff] has been reserved

[    0.489677] system 00:01: [mem 0xfed08000-0xfed09fff] has been reserved

[    0.490232] system 00:01: [mem 0xfed80000-0xfedbffff] has been reserved

[    0.490809] system 00:01: [mem 0xfed1c000-0xfed1cfff] has been reserved

[    0.491365] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved

[    0.492705] pnp: PnP ACPI: found 2 devices

[    0.503398] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns

[    0.504205] pmc-ipc-plat INT34D2:00: io res: [io  0x0400-0x047f]

[    0.504737] pmc-ipc-plat INT34D2:00: punit BIOS data res: [mem 0xfed17080-0xfed17083]

[    0.505393] pmc-ipc-plat INT34D2:00: punit BIOS interface res: [mem 0xfed17084-0xfed17087]

[    0.506121] pmc-ipc-plat INT34D2:00: ipc res: [mem 0xfe042000-0xfe043fff]

[    0.506713] pmc-ipc-plat INT34D2:00: telemetry ssram res: [mem 0xfe900000-0xfe901fff]

[    0.507562] intel_punit_ipc intel_punit_ipc: Invalid IRQ, using polling mode

[    0.508167] intel_punit_ipc intel_punit_ipc: can't request region for resource [mem 0x00000000]

[    0.508919] intel_punit_ipc intel_punit_ipc: can't request region for resource [mem 0x00000000]

[    0.509668] intel_punit_ipc intel_punit_ipc: can't request region for resource [mem 0x00000000]

[    0.510394] intel_punit_ipc intel_punit_ipc: can't request region for resource [mem 0x00000000]

[    0.511176] pci 0000:00:14.0: PCI bridge to [bus 01]

[    0.511628] pci 0000:00:14.0:   bridge window [mem 0x92300000-0x923fffff]

[    0.512284] NET: Registered protocol family 2

[    0.512944] TCP established hash table entries: 32768 (order: 6, 262144 bytes)

[    0.513711] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)

[    0.514522] TCP: Hash tables configured (established 32768 bind 32768)

[    0.515108] UDP hash table entries: 2048 (order: 4, 65536 bytes)

[    0.515679] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)

[    0.516315] NET: Registered protocol family 1

[    0.516909] RPC: Registered named UNIX socket transport module.

[    0.517416] RPC: Registered udp transport module.

[    0.517843] RPC: Registered tcp transport module.

[    0.518240] RPC: Registered tcp NFSv4.1 backchannel transport module.

[    0.519290] Trying to unpack rootfs image as initramfs...

[    0.659697] Freeing initrd memory: 5940K (ffff8800783b6000 - ffff880078983000)

[    0.660324] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)

[    0.660904] software IO TLB [mem 0x6e6fc000-0x726fc000] (64MB) mapped at [ffff88006e6fc000-ffff8800726fbfff]

[    0.661928] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x185ac6cdb26, max_idle_ns: 440795262339 ns

[    0.662823] clocksource: Switched to clocksource tsc

[    0.663325] platform rtc_cmos: registered platform RTC device (no PNP device found)

[    0.664517] Scanning for low memory corruption every 60 seconds

[    0.665517] futex hash table entries: 1024 (order: 4, 65536 bytes)

[    0.666539] HugeTLB registered 2 MB page size, pre-allocated 0 pages

[    0.670597] NFS: Registering the id_resolver key type

[    0.671047] Key type id_resolver registered

[    0.671403] Key type id_legacy registered

[    0.672540] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)

[    0.673166] io scheduler noop registered

[    0.673513] io scheduler deadline registered

[    0.673927] io scheduler cfq registered (default)

[    0.674810] pcieport 0000:00:14.0: Signaling PME through PCIe PME interrupt

[    0.675395] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt

[    0.675974] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[    0.677001] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0

[    0.677636] ACPI: Power Button [PWRF]

[    0.677964] ACPI Error: Could not enable PowerButton event (20150930/evxfevnt-212)

[    0.678642] ACPI Warning: Could not enable fixed event - PowerButton (2) (20150930/evxface-654)

[    0.684676] button: probe of LNXPWRBN:00 failed with error -22

[    0.687720] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled

[    0.689552] Linux agpgart interface v0.103

[    0.689949] [drm] Initialized drm 1.1.0 20060810

[    0.698558] brd: module loaded

[    0.701781] loop: module loaded

[    0.703917] idma64 idma64.0: Found Intel integrated DMA 64-bit

[    0.716205] idma64 idma64.1: Found Intel integrated DMA 64-bit

[    0.728214] idma64 idma64.2: Found Intel integrated DMA 64-bit

[    0.740208] idma64 idma64.3: Found Intel integrated DMA 64-bit

[    0.752218] idma64 idma64.4: Found Intel integrated DMA 64-bit

[    0.764224] idma64 idma64.5: Found Intel integrated DMA 64-bit

[    0.776211] idma64 idma64.6: Found Intel integrated DMA 64-bit

[    0.788223] idma64 idma64.7: Found Intel integrated DMA 64-bit

[    0.800229] idma64 idma64.8: Found Intel integrated DMA 64-bit

[    0.801002] dw-apb-uart.8: ttyS0 at MMIO 0x92430000 (irq = 4, base_baud = 460800) is a 16550A

[    0.802177] idma64 idma64.9: Found Intel integrated DMA 64-bit

[    0.802876] dw-apb-uart.9: ttyS1 at MMIO 0x92432000 (irq = 5, base_baud = 460800) is a 16550A

[    0.804108] console [ttyS2] disabled

[    0.804438] dw-apb-uart.10: ttyS2 at MMIO 0x92434000 (irq = 6, base_baud = 460800) is a 16550A

[    3.151055] console [ttyS2] enabled

[    3.155440] dw-apb-uart.11: ttyS3 at MMIO 0x92436000 (irq = 7, base_baud = 460800) is a 16550A

[    3.165483] idma64 idma64.12: Found Intel integrated DMA 64-bit

[    3.182905] idma64 idma64.13: Found Intel integrated DMA 64-bit

[    3.200901] idma64 idma64.14: Found Intel integrated DMA 64-bit

[    3.224138] Uniform Multi-Platform E-IDE driver

[    3.229323] ide-gd driver 1.18

[    3.232751] ide-cd driver 5.00

[    3.236871] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de

[    3.244641] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI

[    3.251458] e100: Copyright(c) 1999-2006 Intel Corporation

[    3.257617] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI

[    3.265501] e1000: Copyright (c) 1999-2006 Intel Corporation.

[    3.271955] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k

[    3.278482] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.

[    3.285212] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[    3.292530] ehci-pci: EHCI PCI platform driver

[    3.297520] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[    3.304438] ohci-pci: OHCI PCI platform driver

[    3.309428] uhci_hcd: USB Universal Host Controller Interface driver

[    3.316827] xhci_hcd 0000:00:15.0: xHCI Host Controller

[    3.322685] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1

[    3.332097] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810

[    3.341999] hub 1-0:1.0: USB hub found

[    3.346219] hub 1-0:1.0: 4 ports detected

[    3.351203] xhci_hcd 0000:00:15.0: xHCI Host Controller

[    3.357056] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2

[    3.365644] hub 2-0:1.0: USB hub found

[    3.369856] hub 2-0:1.0: 4 ports detected

[    3.374557] usb: port power management may be unreliable

[    3.380784] usbcore: registered new interface driver usb-storage

[    3.387533] usbcore: registered new interface driver usbserial

[    3.394070] usbcore: registered new interface driver usbserial_generic

[    3.401384] usbserial: USB Serial support registered for generic

[    3.408118] usbcore: registered new interface driver ftdi_sio

[    3.414555] usbserial: USB Serial support registered for FTDI USB Serial Device

[    3.422768] usbcore: registered new interface driver pl2303

[    3.429011] usbserial: USB Serial support registered for pl2303

[    3.435671] i8042: PNP: No PS/2 controller found. Probing ports directly.

[    4.530136] i8042: No controller found

[    4.534619] mousedev: PS/2 mouse device common for all mice

[    4.541346] ACPI Error: Could not enable RealTimeClock event (20150930/evxfevnt-212)

[    4.550069] ACPI Warning: Could not enable fixed event - RealTimeClock (4) (20150930/evxface-654)

[    4.560760] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0

[    4.568016] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram, hpet irqs

[    4.576897] i2c /dev entries driver

[    4.580856] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11

[    4.587152] iTCO_wdt: Found a Apollo Lake SoC TCO device (Version=3, TCOBASE=0x0460)

[    4.596087] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)

[    4.602833] md: linear personality registered for level -1

[    4.608962] md: raid0 personality registered for level 0

[    4.614906] md: raid1 personality registered for level 1

[    4.620847] md: raid10 personality registered for level 10

[    4.626983] md: multipath personality registered for level -4

[    4.633412] md: faulty personality registered for level -5

[    4.639770] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com

[    4.649457] sdhci: Secure Digital Host Controller Interface driver

[    4.656381] sdhci: Copyright(c) Pierre Ossman

[    4.661285] sdhci-pci 0000:00:1b.0: SDHCI controller found [8086:1aca] (rev c)

[    4.670648] sdhci-pci 0000:00:1b.0: No vmmc regulator found

[    4.676882] sdhci-pci 0000:00:1b.0: No vqmmc regulator found

[    4.683220] usb 1-3: new full-speed USB device number 2 using xhci_hcd

[    4.695048] mmc0: SDHCI controller on PCI [0000:00:1b.0] using ADMA 64-bit

[    4.702800] sdhci-pci 0000:00:1c.0: SDHCI controller found [8086:1acc] (rev c)

[    4.712124] sdhci-pci 0000:00:1c.0: No vmmc regulator found

[    4.718362] sdhci-pci 0000:00:1c.0: No vqmmc regulator found

[    4.730685] mmc1: SDHCI controller on PCI [0000:00:1c.0] using ADMA 64-bit

[    4.750059] sdhci-pltfm: SDHCI platform and OF driver helper

[    4.756718] usbcore: registered new interface driver usbhid

[    4.762954] usbhid: USB HID core driver

[    4.767249] intel_telemetry_core Init

[    4.771347] intel_telemetry: version 1.0.0 loaded

[    4.780130] u32 classifier

[    4.782175] mmc0: new high speed SDHC card at address 1234

[    4.783715] mmcblk0: mmc0:1234 SA16G 14.4 GiB

[    4.785317]  mmcblk0:

[    4.796843]     Actions configured

[    4.800998] NET: Registered protocol family 10

[    4.806465] sit: IPv6 over IPv4 tunneling driver

[    4.811837] NET: Registered protocol family 17

[    4.816889] NET: Registered protocol family 36

[    4.821883] Key type dns_resolver registered

[    4.827225] microcode: CPU0 sig=0x506c2, pf=0x1, revision=0x8

[    4.833711] microcode: CPU1 sig=0x506c2, pf=0x1, revision=0x8

[    4.840150] microcode: CPU2 sig=0x506c2, pf=0x1, revision=0x8

[    4.846632] microcode: CPU3 sig=0x506c2, pf=0x1, revision=0x8

[    4.853162] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba

[    4.863026] SSE version of gcm_enc/dec engaged.

[    4.870881] Btrfs loaded

[    4.874752] console [netcon0] enabled

[    4.878858] netconsole: network logging started

[    4.884177] rtc_cmos rtc_cmos: setting system clock to 2016-11-15 14:10:28 UTC (1479219028)

[    4.895382] ALSA device list:

[    4.898717]   No soundcards found.

[    4.902707] ttyS2 - failed to request DMA

[    4.908733] Freeing unused kernel memory: 1272K (ffffffff81d27000 - ffffffff81e65000)

[    5.024218] mmc1: new HS400 MMC card at address 0001

[    5.031763] mmcblk1: mmc1:0001 016G32 14.7 GiB

[    5.037097] mmcblk1boot0: mmc1:0001 016G32 partition 1 4.00 MiB

[    5.044004] mmcblk1boot1: mmc1:0001 016G32 partition 2 4.00 MiB

[    5.050944] mmcblk1gp0: mmc1:0001 016G32 partition 4 4.00 MiB

starting version 232

[    5.058503] random: udevd: uninitialized urandom read (16 bytes read, 11 bits of entropy available)

[    5.058773] mmcblk1gp3: mmc1:0001 016G32 partition 7 4.00 MiB

[    5.059975] mmcblk1rpmb: mmc1:0001 016G32 partition 3 4.00 MiB

[    5.072544] random: udevadm: uninitialized urandom read (16 bytes read, 11 bits of entropy available)

[    5.072636] random: udevadm: uninitialized urandom read (16 bytes read, 11 bits of entropy available)

[    5.073147] random: udevadm: uninitialized urandom read (16 bytes read, 11 bits of entropy available)

[    5.073271] random: udevadm: uninitialized urandom read (16 bytes read, 11 bits of entropy available)

[    5.073416] random: udevadm: uninitialized urandom read (16 bytes read, 11 bits of entropy available)

[    5.073536] random: udevadm: uninitialized urandom read (16 bytes read, 11 bits of entropy available)

[    5.073652] random: udevadm: uninitialized urandom read (16 bytes read, 11 bits of entropy available)

[    5.073777] random: udevadm: uninitialized urandom read (16 bytes read, 11 bits of entropy available)

[    5.073890] random: udevadm: uninitialized urandom read (16 bytes read, 11 bits of entropy available)

[    5.177663]  mmcblk1: p1 p2 p3

[    5.464765] EXT4-fs (mmcblk1p3): INFO: recovery required on readonly filesystem

[    5.473010] EXT4-fs (mmcblk1p3): write access will be enabled during recovery

[    5.499329] EXT4-fs warning (device mmcblk1p3): ext4_clear_journal_err:4468: Filesystem error recorded from previous mount: IO failure

[    5.512880] EXT4-fs warning (device mmcblk1p3): ext4_clear_journal_err:4469: Marking fs in need of filesystem check.

[    5.527548] EXT4-fs (mmcblk1p3): recovery complete

[    5.535003] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null)

[    5.625150] systemd[1]: System time before build time, advancing clock.

[    5.895069] systemd[1]: systemd 232 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)

[    5.915398] systemd[1]: Detected architecture x86-64.

Welcome to Ref-Os-Iot 1.0+snapshot-20170503!

[    5.930634] systemd[1]: Set hostname to <intel-5xx-64>.

[    6.000314] systemd[1]: Configuration file /lib/systemd/system/usb-gadget.service is marked executable. Please remove executable permission bits. Proceeding anyway.

[    6.019561] systemd[1]: Configuration file /lib/systemd/system/mtp-server.service is marked executable. Please remove executable permission bits. Proceeding anyway.

[    6.037037] systemd[1]: Configuration file /lib/systemd/system/gettyusb.service is marked executable. Please remove executable permission bits. Proceeding anyway.

[    6.077118] systemd[1]: Reached target Swap.

[  OK  ] Reached target Swap.

[    6.088293] systemd[1]: Created slice User and Session Slice.

[  OK  ] Created slice User and Session Slice.

[    6.101034] systemd[1]: Listening on Journal Socket (/dev/log).

[  OK  ] Listening on Journal Socket (/dev/log).

[    6.116030] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.

[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.

[    6.131911] systemd[1]: Started Forward Password Requests to Wall Directory Watch.

[  OK  ] Started Forward Password Requests to Wall Directory Watch.

[    6.148856] systemd[1]: Listening on udev Kernel Socket.

[  OK  ] Listening on udev Kernel Socket.

[    6.165260] systemd[1]: Listening on Journal Socket.

[  OK  ] Listening on Journal Socket.

[    6.177147] systemd[1]: Listening on udev Control Socket.

[  OK  ] Listening on udev Control Socket.

[    6.190934] systemd[1]: Reached target Remote File Systems.

[  OK  ] Reached target Remote File Systems.

[    6.205156] systemd[1]: Created slice System Slice.

[  OK  ] Created slice System Slice.

[    6.217003] systemd[1]: Reached target Slices.

[  OK  ] Reached target Slices.

[    6.234015] systemd[1]: Starting Create list of required static device nodes for the current kernel...

         Starting Create list of required st��…ce nodes for the current kernel...

[    6.367869] systemd[1]: Mounting Temporary Directory...

         Mounting Temporary Directory...

[    6.388044] systemd[1]: Starting Load Kernel Modules...

         Starting Load Kernel Modules...

[    6.400010] systemd[1]: Created slice system-serial\x2dgetty.slice.

[  OK  ] Created slice system-serial\x2dgetty.slice.

[    6.427015] systemd[1]: Starting iptables firewall...

         Starting iptables firewall...

[    6.439399] systemd[1]: Mounting Debug File System...

         Mounting Debug File System...

[    6.449867] ip_tables: (C) 2000-2006 Netfilter Core Team

[    6.462634] systemd[1]: Mounting POSIX Message Queue File System...

         Mounting POSIX Message Queue File System...

[    6.477558] systemd[1]: Starting ip6tables firewall...

         Starting ip6tables firewall...

[    6.486237] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)

[    6.494987] ip6_tables: (C) 2000-2006 Netfilter Core Team

[    6.495388] systemd[1]: Starting Journal Service...

         Starting Journal Service...

[    6.510859] systemd[1]: Created slice system-getty.slice.

[  OK  ] Created slice system-getty.slice.

[    6.526893] systemd[1]: Starting File System Check on Root Device...

         Starting File System Check on Root Device...

[    6.546889] systemd[1]: Mounting Huge Pages File System...

         Mounting Huge Pages File System...

[    6.559050] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.

[  OK  ] Started Dispatch Password Requests to Console Directory Watch.

[    6.577992] systemd[1]: Reached target Paths.

[  OK  ] Reached target Paths.

[    6.595264] systemd[1]: Mounted Huge Pages File System.

[  OK  ] Mounted Huge Pages File System.

[    6.606945] systemd[1]: Mounted POSIX Message Queue File System.

[  OK  ] Mounted POSIX Message Queue File System.

[    6.621929] systemd[1]: Mounted Debug File System.

[  OK  ] Mounted Debug File System.

[    6.633915] systemd[1]: Mounted Temporary Directory.

[  OK  ] Mounted Temporary Directory.

[    6.646231] systemd[1]: Started Journal Service.

[  OK  ] Started Journal Service.

[  OK  ] Started Create list of required sta��…vice nodes for the current kernel.

[  OK  ] Started Load Kernel Modules.

[  OK  ] Started iptables firewall.

[  OK  ] Started ip6tables firewall.

[  OK  ] Started File System Check on Root Device.

         Starting Remount Root and Kernel File Systems...

         Starting Apply Kernel Variables...

[    6.837546] EXT4-fs (mmcblk1p3): warning: mounting fs with errors, running e2fsck is recommended

[  OK  ] Started Apply Kernel Variables.

[    6.849010] EXT4-fs (mmcblk1p3): re-mounted. Opts: (null)

[  OK  ] Started Remount Root and Kernel File Systems.

         Starting Flush Journal to Persistent Storage...

         Starting udev Coldplug all Devices...

         Starting Create Static Device Nodes in /dev...

[    6.901243] systemd-journald[429]: Received request to flush runtime journal from PID 1

[  OK  ] Started Flush Journal to Persistent Storage.

[  OK  ] Started Create Static Device Nodes in /dev.

[  OK  ] Reached target Local File Systems (Pre).

         Mounting /var/volatile...

         Starting udev Kernel Device Manager...

[  OK  ] Mounted /var/volatile.

         Starting Load/Save Random Seed...

[  OK  ] Reached target Local File Systems.

         Starting Create Volatile Files and Directories...

[  OK  ] Started udev Kernel Device Manager.

[  OK  ] Started udev Coldplug all Devices.

[  OK  ] Started Load/Save Random Seed.

[  OK  ] Started Create Volatile Files and Directorie[    7.029824] Bluetooth: HCI UART driver ver 2.3

s.

[    7.038525] Bluetooth: HCI UART protocol H4 registered

[    7.044883] hci_intel INT33E1:00: No IRQ, falling back to gpio-irq

[    7.051843] hci_intel INT33E1:00: Unable to retrieve IRQ

[    7.057807] hci_intel INT33E1:00: registered, gpio(443)/irq(-6).

[    7.064612] Bluetooth: HCI UART protocol Intel registered

[    7.071553] Loading modules backported from iwlwifi

         Starting Network Time Synchronization...

[    7.077397] iwlwifi-stack-public:release/LinuxCore24:5815:ec01b118

         Starting Update UTMP about System Boot/Shutdown...

[  OK  ] Found device /dev/ttyS2.

[  OK  ] Started Update UTMP about System Boot/Shutdown.

[    7.117264] usbcore: registered new interface driver btusb

[    7.123810] [drm] Memory usable by graphics device = 4096M

[    7.130076] [drm] Replacing VGA console driver

[    7.130392] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014

[    7.132603] Intel(R) Wireless WiFi driver for Linux

[    7.132604] Copyright(c) 2003- 2015 Intel Corporation

[    7.136755] iwlwifi 0000:01:00.0: Direct firmware load for iwl-dbg-cfg.ini failed with error -2

[    7.147624] iwlwifi 0000:01:00.0: capa flags index 3 larger than supported by driver

[    7.148621] iwlwifi 0000:01:00.0: loaded firmware version 27.455470.0 op_mode iwlmvm

[    7.171669] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208

[    7.173555] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled

[    7.174171] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled

[    7.203697] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).

[    7.203698] [drm] Driver supports precise vblank timestamp query.

[    7.211249] Bluetooth: hci0: Device revision is 5

[    7.211250] Bluetooth: hci0: Secure boot is enabled

[    7.211251] Bluetooth: hci0: OTP lock is enabled

[    7.211252] Bluetooth: hci0: API lock is enabled

[    7.211253] Bluetooth: hci0: Debug lock is disabled

[    7.211254] Bluetooth: hci0: Minimum firmware build 1 week 10 2014

[    7.211630] [drm] Finished loading i915/bxt_dmc_ver1.bin (v1.7)

[    7.214548] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi

[    7.227577] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem

[    7.227897] parse error at position 4 in video mode 'efifb'

[    7.280885] EFI Variables Facility v0.08 2004-May-17

[  OK  ] Started Network Time Synchronization.

[    7.294555] random: nonblocking pool is initialized

[  OK  ] Reached target System Time Synchronized.

[    7.313482] intel_rapl: Found RAPL domain package

[    7.322268] intel_rapl: Found RAPL domain core

[    7.327271] intel_rapl: Found RAPL domain uncore

[    7.327274] intel_rapl: Found RAPL domain dram

[  OK  ] Reached target System Initialization.

[  OK  ] Started Daily apt activities.

         Starting sshd.socket.

[  OK  ] Listening on D-Bus System Message Bus Socket.

[  OK  ] Started Daily Cleanup of Temporary Directori[    7.369880] thermal thermal_zone7: failed to read out thermal zone (-5)

es.

[    7.380700] Unable to register with Frequency Manager: -22

[  OK  ] Reached target Timers.

[  OK  ] Listening on sshd.socket.

[  OK  ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.

[  OK  ] Reached target Sockets.

[  OK  ] Reached target Basic System.

[    7.453142] input: gpio-keys as /devices/platform/gpio-keys.0.auto/input/input1

         Starting USB gadget service (networking etc.)...

[  OK  ] Reached target Containers.

[    7.483128] iwlwifi 0000:01:00.0 wlp1s0: renamed from wlan0

[  OK  ] Started D-Bus System Message Bus.

         Starting Connection service...

         Starting Login Service...

         Starting Thermal Daemon Service...

         Mounting Configuration File System...

         Starting Bluetooth service...

         Starting Load/Save RF Kill Switch Status...

[  OK  ] Mounted Configuration File System.

[  OK  ] Started Load/Save RF Kill Switch Status.

[  OK  ] Started Login Service.

[  OK  ] Started Connection service.

[    7.601309] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

[    7.610355] Bluetooth: BNEP filters: protocol multicast

[    7.616263] Bluetooth: BNEP socket layer initialized

[  OK  ] Started Thermal Daemon Service.

[  OK  ] Started Bluetooth service.

         Starting Hostname Service...

[  OK  ] Reached target Bluetooth.

         Starting WPA supplicant...

[  OK  ] Started WPA supplicant.

[  OK  ] Started Hostname Service.

[    7.967531] [drm] failed to retrieve link info, disabling eDP

[    7.974286] parse error at position 4 in video mode 'efifb'

[    7.980745] parse error at position 4 in video mode 'efifb'

[    7.987399] parse error at position 4 in video mode 'efifb'

[    8.133277] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)

[    8.141727] acpi device:44: registered as cooling_device7

[    8.147867] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2

[    8.194329] i915 0000:00:02.0: No connectors reported connected with modes

[    8.194800] snd_hda_intel 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])

[    8.194811] [drm] Initialized i915 1.6.0 20160411 for 0000:00:02.0 on minor 0

[    8.195060] pwm-lpss 0000:00:1a.0: can't derive routing for PCI INT A

[    8.195062] pwm-lpss 0000:00:1a.0: PCI INT A: no GSI

[    8.233137] [drm] Cannot find any crtc or sizes - going 1024x768

[    8.241038] fbcon: inteldrmfb (fb0) is primary device

[    8.241208] Console: switching to colour frame buffer device 128x48

[    8.257354] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device

[  OK  ] Created slice system-systemd\x2dbacklight.sl[    8.346950] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input3

ice.

[    8.358991] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input4

[    8.369867] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input5

         Starting Load/Save Screen Backlight��…htness of backlight:acpi_video0...

[  OK  ] Started Load/Save Screen Backlight ��…ightness of backlight:acpi_video0.

[  OK  ] Reached target Sound Card.

[    8.642949] using random self ethernet address

[    8.647993] using random host ethernet address

[    8.668460] usb0: HOST MAC 42:48:21:09:60:40

[    8.673524] usb0: MAC e2:fe:55:4d:63:17

[    9.163848] Bluetooth: hci0: Waiting for firmware download to complete

[    9.171335] Bluetooth: hci0: Firmware loaded in 2005966 usecs

[    9.178079] Bluetooth: hci0: Waiting for device to boot

[    9.190798] Bluetooth: hci0: Device booted in 12575 usecs

[    9.320644] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc

[    9.332785] Bluetooth: hci0: Applying Intel DDC parameters completed

[    9.340713] Bluetooth: hci0: Setting Intel event mask failed (-16)

[    9.686037] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready

[  OK  ] Started USB gadget service (networking etc.).

[  OK  ] Started MTP-server over USB.

[  OK  ] Reached target Network.

         Starting Permit User Sessions...

[  OK  ] Started Getty to run on usb serial.

[    9.756504] [drm] RC6 on

[  OK  ] Started Permit User Sessions.

[    9.845486] mtp_open

[  OK  ] Started Getty on tty1.

[  OK  ] Started Serial Getty on ttyS2.

[  OK  ] Reached target Login Prompts.

[  OK  ] Reached target Multi-User System.

[  OK  ] Started Loads ipu4 modules after booting is completed.

         Starting Update UTMP about System Runlevel Changes...

[  OK  ] Started Update UTMP about System Runlevel Changes.

Ref-Os-Iot 1.0+snapshot-20170502 intel-5xx-64 ttyS2

[   10.065315] media: Linux media interface: v0.10

intel-5xx-64 login: root (automatic login)

************************************

*** This is a development [   10.078889] Linux video capture interface: v2.00

image! ***

*** Do not use in production.    ***

************************************

[   10.141138] **********************************************************

[   10.148502] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **

[   10.155856] **                                                      **

[   10.163194] ** trace_printk() being used. Allocating extra memory.  **

[   10.170550] **                                                      **

[   10.177890] ** This means that this is a DEBUG kernel and it is     **

[   10.185242] ** unsafe for production use.                           **

[   10.192597] **                                                      **

[   10.199955] ** If you see this message and you are not debugging    **

[   10.207308] ** the kernel, report this immediately to your vendor!  **

[   10.214658] **                                                      **

[   10.222012] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **

[   10.229365] **********************************************************

[   10.237835] intel-ipu4 0000:00:03.0: Device 0x1a88 (rev: 0xc)

[   10.244371] intel-ipu4 0000:00:03.0: physical base address 0x91000000

[   10.251648] intel-ipu4 0000:00:03.0: mapped as: 0xffffc90002000000

[   10.258830] intel-ipu4 0000:00:03.0: IPU4 in non-secure mode

[   10.266657] intel-ipu4 0000:00:03.0: cpd file name: ipu4_cpd_b0.bin

root@intel-5xx-64:~# [   10.380255] intel-ipu4 0000:00:03.0: CSS release: 20170112

[   10.414777] intel-ipu4-mmu intel-ipu4-mmu0: MMU: 1, allocated page for trash: 0xffffea0005db5d40

[   10.446847] intel-ipu4-mmu intel-ipu4-mmu0: mmu is not ready yet. skipping.

[   10.454821] intel-ipu4-mmu intel-ipu4-mmu1: MMU: 0, allocated page for trash: 0xffffea0005db5d80

[   10.593286] Could not create tracefs 'ipu4_pg_kcmd' directory

[   10.599825] Could not create tracefs 'ipu4_perf_reg' directory

[   10.606416] Could not create tracefs 'ipu4_sof_seqid' directory

[   10.623810] intel-ipu4-mmu intel-ipu4-mmu0: mmu is not ready yet. skipping.

[   10.631770] intel-ipu4-mmu intel-ipu4-mmu1: mmu is not ready yet. skipping.

[   10.640012] intel-ipu4-mmu intel-ipu4-mmu1: iova trash buffer for MMUID: 0 is 0x2139095040

[   10.649330] iommu: Adding device intel-ipu4-psys0 to group 0

[   10.657640] intel-ipu4-psys intel-ipu4-psys0: pkg_dir entry count:16

[   10.665011] intel-ipu4-psys intel-ipu4-psys0: psys probe minor: 0

[   10.813344] Could not create tracefs 'ipu4_pg_kcmd' directory

[   10.819838] Could not create tracefs 'ipu4_perf_reg' directory

[   10.826396] Could not create tracefs 'ipu4_sof_seqid' directory

[   10.843808] intel-ipu4-mmu intel-ipu4-mmu0: mmu is not ready yet. skipping.

[   10.852208] intel-ipu4-mmu intel-ipu4-mmu0: iova trash buffer for MMUID: 1 is 0x2139095040

[   10.863126] iommu: Adding device intel-ipu4-isys0 to group 1

[   10.870717] intel-ipu4-isys intel-ipu4-isys0: isys probe ffff8801798d6400 ffff8801798d6400

[   10.886901] intel-ipu4-isys intel-ipu4-isys0: no subdevice info provided

[   10.898391] crlmodule i2c-OV5670AA:00: crlmodule_populate_ds ov5670 selected

[   10.907550] crlmodule i2c-OV5670AA:00: No msrlists associated with sensor

[   11.029671] crlmodule i2c-OV5670AA:00: read from offset 0x300b error -121

[   11.039067] crlmodule i2c-OV5670AA:00: sensor detection failed

[   11.046926] intel-ipu4-isys intel-ipu4-isys0: can't create new i2c subdev

[   11.057280] crlmodule i2c-SONY214A:00: crlmodule_populate_ds imx214 selected

[   11.066732] crlmodule i2c-SONY214A:00: No msrlists associated with sensor

[   11.206926] crlmodule i2c-SONY214A:00: read from offset 0x19 error -121

[   11.216503] crlmodule i2c-SONY214A:00: sensor detection failed

[   11.225146] intel-ipu4-isys intel-ipu4-isys0: can't create new i2c subdev

[   11.234979] crlmodule i2c-SONY214A:00: DSDT string id: DW9714

[   11.242744] crlmodule i2c-SONY214A:00: Creating vcm instance: bus: 8 addr 0xc dw9714

[   11.252685] intel-ipu4-isys intel-ipu4-isys0: New i2c device: dw9714

[   11.319336] dw9714 8-000c: I2C write fail fail

[   11.326321] dw9714 8-000c: dw9714_runtime_resume I2C failure: -5

[   11.336416] dw9714 8-000c: I2C write fail fail

[   12.255707] sdhci: Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock

[   12.275514] mmc1: tuning execution failed

[   12.281413] mmcblk1: unknown error -5 sending read/write command, card status 0xc00900

[   12.298459] mmc1: unexpected status 0x800900 after switch

[   12.433708] sdhci: Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock

[   12.453727] mmc1: tuning execution failed

[   12.459759] mmc1: tried to reset card, got error -5

[   12.466752] blk_update_request: I/O error, dev mmcblk1, sector 12740864

[   12.475661] blk_update_request: I/O error, dev mmcblk1, sector 12740872

[   12.484541] blk_update_request: I/O error, dev mmcblk1, sector 12740880

[   12.493371] blk_update_request: I/O error, dev mmcblk1, sector 12740888

[   12.502208] blk_update_request: I/O error, dev mmcblk1, sector 12740896

[   12.511024] blk_update_request: I/O error, dev mmcblk1, sector 12740904

[   12.519865] blk_update_request: I/O error, dev mmcblk1, sector 12740912

[   12.528627] blk_update_request: I/O error, dev mmcblk1, sector 12740920

[   12.537368] blk_update_request: I/O error, dev mmcblk1, sector 12740928

[   12.546107] blk_update_request: I/O error, dev mmcblk1, sector 12740936

[   35.859654] mmc1: Timeout waiting for hardware interrupt.

[   35.868856] ------------[ cut here ]------------

[   35.875135] WARNING: CPU: 0 PID: 0 at /home/root123/work/ref-os-iot/build/tmp-glibc/work-shared/intel-5xx-64/kernel-source/drivers/mmc/host/sdhci.c:1017 sdhci_send_command+0x729/0xc70()

[   35.895956] Modules linked in: intel_ipu4_isys_mod_bxtB0(O) videobuf2_v4l2 videobuf2_core intel_ipu4_psys_mod_bxtB0(O) intel_ipu4_mmu_bxtB0(O) intel_ipu4_mod_bxtB0(O) iova intel_ipu4_acpi(O) videobuf2_dms

[   36.037614] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G           O    4.4.41-yocto-standard #1

[   36.048610] Hardware name: Intel Corp. Broxton M/SDS, BIOS GTPP161A.X64.0143.B30.1611152208 11/15/2016

[   36.060596]  0000000000000000 ffff88017fc03d30 ffffffff813c545b 0000000000000000

[   36.070467]  ffffffff81b72bf8 ffff88017fc03d68 ffffffff81073db2 ffff88007acdd500

[   36.080344]  ffff88017a84c930 0000000000000246 ffff88017a84c970 ffff88007acdd500

[   36.090221] Call Trace:

[   36.094529]  <IRQ>  [<ffffffff813c545b>] dump_stack+0x4d/0x72

[   36.102555]  [<ffffffff81073db2>] warn_slowpath_common+0x82/0xc0

[   36.110854]  [<ffffffff81073eaa>] warn_slowpath_null+0x1a/0x20

[   36.118949]  [<ffffffff816f8ae9>] sdhci_send_command+0x729/0xc70

[   36.127221]  [<ffffffff813d1e17>] ? __const_udelay+0x27/0x30

[   36.135094]  [<ffffffff816f6059>] ? sdhci_reset+0x59/0xc0

[   36.142674]  [<ffffffff816f9108>] sdhci_finish_data+0xd8/0x3a0

[   36.150742]  [<ffffffff816f93d0>] ? sdhci_finish_data+0x3a0/0x3a0

[   36.159066]  [<ffffffff816f944b>] sdhci_timeout_timer+0x7b/0xc0

[   36.167162]  [<ffffffff810c690e>] call_timer_fn+0x3e/0x170

[   36.174766]  [<ffffffff816f93d0>] ? sdhci_finish_data+0x3a0/0x3a0

[   36.183042]  [<ffffffff810c7054>] run_timer_softirq+0x204/0x2a0

[   36.191110]  [<ffffffff810784bf>] __do_softirq+0x9f/0x2e0

[   36.198558]  [<ffffffff8107884d>] irq_exit+0x9d/0xa0

[   36.205481]  [<ffffffff818ef6d2>] smp_apic_timer_interrupt+0x42/0x50

[   36.213958]  [<ffffffff818edd8f>] apic_timer_interrupt+0x7f/0x90

[   36.222044]  <EOI>  [<ffffffff816deb33>] ? cpuidle_enter_state+0x123/0x2f0

[   36.231131]  [<ffffffff816deb1d>] ? cpuidle_enter_state+0x10d/0x2f0

[   36.239549]  [<ffffffff816ded37>] cpuidle_enter+0x17/0x20

[   36.247005]  [<ffffffff810ad952>] call_cpuidle+0x32/0x60

[   36.254378]  [<ffffffff816ded13>] ? cpuidle_select+0x13/0x20

[   36.262145]  [<ffffffff810adbe3>] cpu_startup_entry+0x263/0x320

[   36.270230]  [<ffffffff818e7344>] rest_init+0x84/0x90

[   36.277353]  [<ffffffff81d3df21>] start_kernel+0x3f5/0x402

[   36.284976]  [<ffffffff81d3d2fe>] x86_64_start_reservations+0x2a/0x2c

[   36.293689]  [<ffffffff81d3d468>] x86_64_start_kernel+0x168/0x176

[   36.302021] ---[ end trace f506225cace62d5f ]---

[   36.312934] mmcblk1: error -110 sending status command, retrying

[   36.321429] mmcblk1: error -110 sending stop command, original cmd response 0x0, card status 0xc00900

[   36.333604] mmcblk1: error -110 transferring data, sector 12979104, nr 8, cmd response 0x0, card status 0x0

[   36.474709] sdhci: Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock

[   36.495081] mmc1: tuning execution failed

[   36.501217] mmc1: tried to reset card, got error -5

[   36.508282] blk_update_request: 118 callbacks suppressed

[   36.515796] blk_update_request: I/O error, dev mmcblk1, sector 12979104

[   36.524773] blk_update_request: I/O error, dev mmcblk1, sector 12979104

[   36.533741] Aborting journal on device mmcblk1p3-8.

[   37.508080] EXT4-fs error (device mmcblk1p3): ext4_journal_check_start:56: Detected aborted journal

[   37.519530] EXT4-fs (mmcblk1p3): Remounting filesystem read-only

root@intel-5xx-64:~# [  306.195678] EXT4-fs (mmcblk1p3): error count since last fsck: 16

[  306.205554] EXT4-fs (mmcblk1p3): initial error at time 1493723881: ext4_journal_check_start:56

[  306.218341] EXT4-fs (mmcblk1p3): last error at time 1493723397: ext4_journal_check_start:56

Hello JC,

thank you for your answer. Two comments from my side:

- When I want to connect a displayport monitor the USB-C (and thunderbolt) port is blocked. Not good. The only option I see is to spend another $200 to buy a thunderbolt docking station. Would this work? I was looking for a HDMI 2.0 to displayport adapter like the one listed on the Intel webiste, but these cannot be purchased, at least not in Germany.

- Having a KVM device is not so 'exotic', at least not for a software developer. Plenty of hardware on the desk. There is no KVM switch on your list. Does this mean, that I cannot recommend your NUC 7i7 for this scenario? The company I work for (just about 8k people) would love to hear this...

Please find a solution, all other NUCs I have (5i5, 6i7) work in my setup, it is just the 7i7 which fails miserably..

Best regards

Josef

Hi,

I have PoC running in our environment and it's looking good. But one thing bothers me badly, when connecting to HUB (HP Slice for... / Windows 10) shared screen has black borders so image is cropped and we are losing precious screen display area. How to make HUB-screen to utilize used display 100%. Source has same resolution than HUB-display. I'm running Enterprise-mode with HTTPS.

Teemu

Bom Dia a todos. tenho uma mobo dz68bc novinha, e ela funcionava perfeitamente com o kit (I7-2600 e 32Gb 1600MHZ Corsair) e repentinamente ao ligar ela não quer mais reconhecer as memorias, ela soa o bip 3 vezes e reinicia.....no painel numérico aparece 15 muda para 22 e volta para 15.  o que posso fazer para ela voltar ao normal.  Já testei outros modelos de memoria mais continua da mesma forma

Hi Steven

We have the server currently sitting on a workbench in our office. Its power supplies are directly connected to power sockets and there is no UPS protecting those sockets as far as I am aware.

I chose option 3, to install both the SDR and FRU when I performed the BIOS update with the OFU.

Kind regards and thanks

Ryan

Jose P.,

S0i3 won't work for us because we need to be completely unpowered.  S0i3 stores to RAM, so power is still required to keep RAM functional.  S0i4 may do the trick though.  Your link pointed me to how you can enter the S0ix states.  It looks like I would do: echo "disk" /sys/power/state 

I will try this when I get a chance. Thank you.

Bryan

Hi!

I have an esprimo fujitsu e 3521 with Windows 10 64bit as OS and intel Pentium processor.I downloaded drivers from fujits but in  device management i must insall

\VEN_8086&DEV2E33&SUBSYS_114C1734&REV_03\3&21436425&0&11.Where Can I download these drivers?Thanks for help!

Hello,

I have a strange Wi-Fi issue with ASRock J4205-ITX and Intel 8265 M.2 card:

1. Wi-Fi card is available just after cold boot, after reboot/restart Wi-Fi card is not recognized and is unavailable. This happens both on Linux and Windows 10.

2. Bluetooth is working fine, even after reboot/restart.

Wi-Fi and Bluetooth is enabled in BIOS, BIOS version is newest. I previously own an Intel 7260 card and it was working just fine, but speeds were pretty low, that's why I've upgraded to newer card.

Any one had similar problems or know the cause?

Thank you,

Best Regards!

Hello Tao Yu,
 
            I will like to follow up on your original question about the message on the RAID Web Console.  I just wanted to verify if the information provided helped or if there is something else I can help with.
 
If there is anything else we can help please feel free to ask.

Best regards,
              
Henry A.

7th Gen Intel(R) Core(TM) processor family

Microsoft Windows® 10 64-bit Only

6th Gen Intel(R) Core(TM) processor family

Microsoft Windows* 7 64-bit

Microsoft Windows* 8.1 64-bit

Microsoft Windows® 10 64-bit

--------------------------------------------------------------------

I HAVE A Microsoft Windows 10 64-bit

---------------------------------------------------------------------------------

PCI\VEN_8086&DEV_0F31&SUBSYS_21DE103C&REV_0E

PCI\VEN_8086&DEV_0F31&SUBSYS_21DE103C

PCI\VEN_8086&DEV_0F31&CC_030000

PCI\VEN_8086&DEV_0F31&CC_0300

C:\Users\alexp>dispdiag -out %homepath%\Desktop\DispDiag-Intel-Issue.dat

Dump file: \Users\alexp\Desktop\DispDiag-Intel-Issue.dat

---------------------------------------------------------------------------------------------------------

Pls help me i have the 64.bit and its says ONLY and i have it

---------------------------------------------------------------------------------------------------------

# SSU Scan Information

Scan Info:

Version:"2.5.0.8"

Date:"05/09/2017"

Time:"00:00:56.3740574"

# Scanned Hardware

Computer:

          BaseBoard Manufacturer:"Hewlett-Packard"

          BIOS Mode:"UEFI"

          BIOS Version/Date:"Insyde F.27 , 04/07/2016 12:00 AM"

          CD or DVD:"hp DVDRW  DU8AESH"

          Embedded Controller Version:"6.39"

          Platform Role:"Mobile"

          Processor:"Intel(R) Pentium(R) CPU  N3540  @ 2.16GHz , GenuineIntel"

          Secure Boot State:"On"

          SMBIOS Version:"2.8"

          Sound Card:"Realtek High Definition Audio"

          Sound Card:"Intel(R) Display Audio"

          System Manufacturer:"HP"

          System Model:"HP 15 Notebook PC"

          System SKU:"N5Y05UA#ABA"

          System Type:"x64-based PC"

          - "Display"

               Intel ® Graphics Driver Version:"1.6.40.0"

               - "Intel(R) HD Graphics"

                    Adapter Compatibility:"Intel Corporation"

                    Adapter DAC Type:"Internal"

                    Adapter RAM:"2.01 GB"

                    Availability:"Running or Full Power"

                    Bits Per Pixel:"32"

                    - "Caption":"Intel(R) HD Graphics"

                         Link:"http://www.intel.com/content/www/us/en/search.html?keyword=HD+Graphics"

                    CoInstallers:"igfxCoIn_v4425.dll, CoDeviceInstall"

                    Color Table Entries:"4294967296"

                    Dedicated Video Memory:"Not Available"

                    Driver:"igdkmd64.sys"

                    Driver Date:"04/03/2016 07:00 PM"

                    Driver Path:"C:\WINDOWS\system32\DRIVERS\igdkmd64.sys"

                    Driver Provider:"Intel Corporation"

                    Driver Version:"10.18.10.4425"

                    INF:"oem11.inf"

                    INF Section:"iVLV2M_w10"

                    Install Date:"Not Available"

                    Installed Drivers:"igdumdim64.dll,igd10iumd64.dll,igd10iumd64.dll,igdumdim32,igd10iumd32,igd10iumd32"

                    Last Error Code:"Not Available"

                    Last Error Code Description:"Not Available"

                    Last Reset:"Not Available"

                    Location:"PCI bus 0, device 2, function 0"

                    Manufacturer:"Intel Corporation"

                    Microsoft DirectX* Version:"DirectX 12"

                    Monochrome:"No"

                    Number of Colors:"4294967296"

                    Number of Video Pages:"Not Available"

                    PNP Device ID:"PCI\VEN_8086&DEV_0F31&SUBSYS_21DE103C&REV_0E\3&11583659&1&10"

                    Power Management Capabilities:"Not Available"

                    Power Management Supported:"Not Available"

                    Refresh Rate - Current:"59 Hz"

                    Refresh Rate - Maximum:"59 Hz"

                    Refresh Rate - Minimum:"40 Hz"

                    Resolution:"1366 X 768"

                    Scan Mode:"Noninterlaced"

                    Service Name:"igfx"

                    Status:"OK"

                    Video Architecture:"VGA"

                    Video Memory:"Unknown"

                    Video Processor:"Intel(R) HD Graphics"

          - "Memory"

               Physical Memory (Available):"1.57 GB"

               Physical Memory (Installed):"4 GB"

               Physical Memory (Total):"3.89 GB"

               - "BANK 0"

                    Capacity:"4 GB"

                    Channel:"Bottom-Slot 1(Left)"

                    Configured Clock Speed:"1333 MHz"

                    Configured Voltage:"0 millivolts"

                    Data Width:"64 bits"

                    Form Factor:"SODIMM"

                    Interleave Position:"Not Available"

                    Manufacturer:"Samsung"

                    Maximum Voltage:"Not Available"

                    Memory Type:"DDR3"

                    Minimum Voltage:"Not Available"

                    Part Number:"M471B5173EB0-YK0"

                    Serial Number:"23171694"

                    Status:"Not Available"

                    Type:"Not Available"

          - "Motherboard"

               Availability:"Running or Full Power"

               BIOS:"F.27, HPQOEM - 3"

               Caption:"Motherboard"

               Chipset:"Not Available"

               Date:"04/06/2016 07:00 PM"

               Install Date:"Not Available"

               Last Error Code:"Not Available"

               Last Error Code Description:"Not Available"

               Manufacturer:"Hewlett-Packard"

               Model:"Not Available"

               Part Number:"Not Available"

               PNP Device ID:"Not Available"

               Power Management Capabilities:"Not Available"

               Power Management Supported:"Not Available"

               Product:"233F"

               Serial Number:"PFKGU038J590WC"

               Status:"OK"

               Version:"06.27"

          - "Networking"

               Intel ® Network Connections Install Options:"Not Available"

               Intel ® Network Connections Version:"Not Available"

               Intel ® PROSet/Wireless Software Version:"Not Available"

               - "Realtek PCIe FE Family Controller"

                    Availability:"Running or Full Power"

                    Caption:"Realtek PCIe FE Family Controller"

                    CoInstallers:"Not Available"

                    Default IP Gateway:"Not Available"

                    DHCP Enabled:"Yes"

                    DHCP Lease Expires:"Not Available"

                    DHCP Lease Obtained:"Not Available"

                    DHCP Server:"Not Available"

                    Driver:"rt640x64.sys"

                    Driver Date:"01/23/2017 12:00 AM"

                    Driver Path:"C:\WINDOWS\system32\drivers\rt640x64.sys"

                    Driver Provider:"Realtek"

                    Driver Version:"10.14.123.2017"

                    Index:"0002"

                    INF:"oem31.inf"

                    INF Section:"RTL8106EUS.ndi.NT"

                    Install Date:"Not Available"

                    Installed:"Yes"

                    IP Address:"Not Available"

                    IP Subnet:"Not Available"

                    Last Error Code:"Not Available"

                    Last Error Code Description:"Not Available"

                    Last Reset:"05/09/2017 10:39 PM"

                    Location:"PCI bus 3, device 0, function 0"

                    MAC Address:"A0:8C:FD:1B:CC:59"

                    Manufacturer:"Realtek"

                    Media Type:

                    Net Connection ID:"Ethernet"

                    NetCfgInstanceId:"{814677AF-E2EE-4865-8A73-21093D23E836}"

                    Number of VLANs:"0"

                    PNP Device ID:"PCI\VEN_10EC&DEV_8136&SUBSYS_21DE103C&REV_08\4&4DF52B6&0&00E2"

                    Port:"Not Available"

                    Power Management (Low Power):"Not Available"

                    Power Management (Wake On LAN):"Not Available"

                    Power Management (Wake on Magic Packet):"Not Available"

                    Power Management Capabilities:"Not Available"

                    Power Management Supported:"No"

                    Product Type:"Realtek PCIe FE Family Controller"

                    Service Name:"rt640x64"

                    Status:"Enabled"

                    Team Name:"Not in a team"

                    Temperature:

                    Type:"Ethernet 802.3"

                    - "Service Bindings"

                         Client for Microsoft Networks:

                         File and Printer Sharing for Microsoft Networks:

                         Internet Protocol Version 4 (TCP/IPv4):

                         Internet Protocol Version 6 (TCP/IPv6):

                         Link-Layer Topology Discovery Mapper I/O Driver:

                         Link-Layer Topology Discovery Responder:

                         Microsoft LLDP Protocol Driver:

                         QoS Packet Scheduler:

                    - "Settings"

                         *FlowControl:Flow Control:"Rx & Tx Enabled (3)"

                         *InterruptModeration:Interrupt Moderation:"Enabled (1)"

                         *IPChecksumOffloadIPv4:IPv4 Checksum Offload:"Rx & Tx Enabled (3)"

                         *LsoV2IPv4:Large Send Offload v2 (IPv4):"Enabled (1)"

                         *LsoV2IPv6:Large Send Offload v2 (IPv6):"Enabled (1)"

                         *NumRssQueues:Maximum Number of RSS Queues:"4 Queues (4)"

                         *PMARPOffload:ARP Offload:"Enabled (1)"

                         *PMNSOffload:NS Offload:"Enabled (1)"

                         *PriorityVLANTag:Priority & VLAN:"Priority & VLAN Enabled (3)"

                         *ReceiveBuffers:Receive Buffers:"512 (512)"

                         *RSS:Receive Side Scaling:"Enabled (1)"

                         *SpeedDuplex:Speed & Duplex:"Auto Negotiation (0)"

                         *TCPChecksumOffloadIPv4:TCP Checksum Offload (IPv4):"Rx & Tx Enabled (3)"

                         *TCPChecksumOffloadIPv6:TCP Checksum Offload (IPv6):"Rx & Tx Enabled (3)"

                         *TransmitBuffers:Transmit Buffers:"128 (128)"

                         *UDPChecksumOffloadIPv4:UDP Checksum Offload (IPv4):"Rx & Tx Enabled (3)"

                         *UDPChecksumOffloadIPv6:UDP Checksum Offload (IPv6):"Rx & Tx Enabled (3)"

                         *WakeOnMagicPacket:Wake on Magic Packet:"Enabled (1)"

                         *WakeOnPattern:Wake on pattern match:"Enabled (1)"

                         AdvancedEEE:Advanced EEE:"Enabled (1)"

                         EEE:Energy Efficient Ethernet:"Enabled (1)"

                         S5WakeOnLan:Shutdown Wake-On-Lan:"Enabled (1)"

                         WolShutdownLinkSpeed:WOL & Shutdown Link Speed:"10 Mbps First (0)"

               - "Realtek RTL8188EE 802.11 b/g/n Wi-Fi Adapter"

                    Access Point:"78:8d:f7:83:94:f8"

                    Authentication:"WPA2-Personal"

                    Availability:"Running or Full Power"

                    Caption:"Realtek RTL8188EE 802.11 b/g/n Wi-Fi Adapter"

                    Channel:"11"

                    Cipher:"CCMP"

                    CoInstallers:"Not Available"

                    Connection Mode:"Auto Connect"

                    Default IP Gateway:"192.168.0.1"

                    DHCP Enabled:"Yes"

                    DHCP Lease Expires:"05/16/2017 10:43 PM"

                    DHCP Lease Obtained:"05/09/2017 10:43 PM"

                    DHCP Server:"192.168.0.1"

                    Driver:"rtwlane.sys"

                    Driver Date:"11/11/2016 12:00 AM"

                    Driver Path:"C:\WINDOWS\system32\DRIVERS\rtwlane.sys"

                    Driver Provider:"Realtek Semiconductor Corp."

                    Driver Version:"2023.45.1017.2016"

                    Index:"0001"

                    INF:"oem27.inf"

                    INF Section:"HP8188ee.ndi"

                    Install Date:"Not Available"

                    Installed:"Yes"

                    IP Address:"192.168.0.17;fe80::21cf:bdce:28dc:7e46"

                    IP Subnet:"255.255.255.0;64"

                    Last Error Code:"Not Available"

                    Last Error Code Description:"Not Available"

                    Last Reset:"05/09/2017 10:39 PM"

                    Location:"PCI bus 2, device 0, function 0"

                    MAC Address:"28:56:5A:88:49:1F"

                    Manufacturer:"Realtek Semiconductor Corp."

                    Media Type:

                    Net Connection ID:"Wi-Fi"

                    NetCfgInstanceId:"{2E5EE407-B77F-4CFE-B903-75C84F4FD8EF}"

                    Network Name:"HITRON-94F0"

                    Network Type:"Infrastructure"

                    Number of VLANs:"0"

                    PNP Device ID:"PCI\VEN_10EC&DEV_8179&SUBSYS_197D103C&REV_01\4&AB80DAA&0&00E1"

                    Port:"Not Available"

                    Power Management (Low Power):"Not Available"

                    Power Management (Wake On LAN):"Not Available"

                    Power Management (Wake on Magic Packet):"Not Available"

                    Power Management Capabilities:"Not Available"

                    Power Management Supported:"No"

                    Product Type:"Realtek RTL8188EE 802.11 bgn Wi-Fi Adapter"

                    Profile:"HITRON-94F0"

                    Radio Type:"802.11n"

                    Receive Rate:"150 Mbps"

                    Service Name:"RTWlanE"

                    Signal Strength:"84%"

                    State:"connected"

                    Status:"Enabled"

                    Team Name:"Not in a team"

                    Temperature:

                    Transmit Rate:"150 Mbps"

                    Type:"Ethernet 802.3"

                    - "Service Bindings"

                         Client for Microsoft Networks:

                         File and Printer Sharing for Microsoft Networks:

                         Internet Protocol Version 4 (TCP/IPv4):

                         Internet Protocol Version 6 (TCP/IPv6):

                         Link-Layer Topology Discovery Mapper I/O Driver:

                         Link-Layer Topology Discovery Responder:

                         Microsoft LLDP Protocol Driver:

                         QoS Packet Scheduler:

                    - "Settings"

                         ActingAsClassMode:Classroom mode:"Disabled (0)"

                         AH_BcnIntv:Beacon Interval:"100 (100)"

                         AntDivSel:Antenna Diversity Selection :"Auto (0)"

                         b40Intolerant:Fat Channel Intolerant:"Disabled (0)"

                         BW40MHzFor2G:802.11n channel width for 2.4GHz:"Auto (1)"

                         Dot11dEnable:802.11d:"Disabled (0)"

                         HTMode:HT mode:"Enabled (2)"

                         PreambleMode:Preamble Mode:"Short & long (2)"

                         ProtectionMode:Mixed mode protection:"CTS-to-self Enabled (1)"

                         RegROAMSensitiveLevel:Roaming Aggressiveness:"4. Medium (75)"

                         TxPwrLevel:Transmit power:"5. Highest (0)"

                         WirelessMode:Wireless Mode:"3. 802.11b/g (6)"

          - "Operating System"

               .Net Framework Version:"2.0,3.0,3.5,4.0,4.7"

               Boot Device:"\Device\HarddiskVolume1"

               Internet Browser:"Google Chrome,58.0, Internet Explorer,11.296"

               Locale:"United States"

               OS Manufacturer:"Microsoft Corporation"

               OS Name:"Microsoft Windows 10 Home"

               Other OS Description:"Not Available"

               Page File:"C:\pagefile.sys"

               Page File Space:"5.86 GB"

               Physical Memory (Available):"1.58 GB"

               Physical Memory (Installed):"4 GB"

               Physical Memory (Total):"3.89 GB"

               System Directory:"C:\WINDOWS\system32"

               Version:"10.0.15063 Build 15063"

               Virtual Memory (Available):"7.17 GB"

               Virtual Memory (Total):"9.75 GB"

               Windows Directory:"C:\WINDOWS"

               - "Installed Updates"

                    KB2151757:"Microsoft Visual C++ 2010  x86 Redistributable - 10.0.40219 [5/6/2017]"

                    KB2151757:"Microsoft Visual C++ 2010  x64 Redistributable - 10.0.40219 [5/6/2017]"

                    KB2467173:"Microsoft Visual C++ 2010  x64 Redistributable - 10.0.40219 [5/6/2017]"

                    KB2467173:"Microsoft Visual C++ 2010  x86 Redistributable - 10.0.40219 [5/6/2017]"

                    KB2468871:"Microsoft .NET Framework 4 Extended [Not Available]"

                    KB2468871:"Microsoft .NET Framework 4 Client Profile [Not Available]"

                    KB2468871v2:"Microsoft .NET Framework 4 Extended [Not Available]"

                    KB2468871v2:"Microsoft .NET Framework 4 Client Profile [Not Available]"

                    KB2478063:"Microsoft .NET Framework 4 Client Profile [Not Available]"

                    KB2478063:"Microsoft .NET Framework 4 Extended [Not Available]"

                    KB2533523:"Microsoft .NET Framework 4 Extended [Not Available]"

                    KB2533523:"Microsoft .NET Framework 4 Client Profile [Not Available]"

                    KB2544514:"Microsoft .NET Framework 4 Client Profile [Not Available]"

                    KB2544514:"Microsoft .NET Framework 4 Extended [Not Available]"

                    KB2600211:"Microsoft .NET Framework 4 Extended [Not Available]"

                    KB2600211:"Microsoft .NET Framework 4 Client Profile [Not Available]"

                    KB2600217:"Microsoft .NET Framework 4 Extended [Not Available]"

                    KB2600217:"Microsoft .NET Framework 4 Client Profile [Not Available]"

                    KB4016871:"Security Update [5/10/2017]"

                    KB4018483:"Security Update [5/5/2017]"

                    KB4020821:"Security Update [5/10/2017]"

                    KB982573:"Microsoft Visual C++ 2010  x86 Redistributable - 10.0.40219 [5/6/2017]"

                    KB982573:"Microsoft Visual C++ 2010  x64 Redistributable - 10.0.40219 [5/6/2017]"

          - "Processor"

               - "Intel(R) Pentium(R) CPU  N3540  @ 2.16GHz"

                    Architecture:"x64"

                    ATPO:"Not Available"

                    Availability:"Running or Full Power"

                    Caption:"Intel64 Family 6 Model 55 Stepping 8"

                    - "Chipset Name":"Intel(R) Pentium(R) CPU  N3540  @ 2.16GHz"

                         Link:"http://www.intel.com/content/www/us/en/search.html?keyword=Pentium+CPU++N3540++"

                    CPU Speed:"0.66 GHz"

                    Current Voltage:"8. volts"

                    Driver:"Not Available"

                    Driver Date:"04/21/2009 12:00 AM"

                    Driver Path:"C:\WINDOWS\system32\drivers\intelppm.sys"

                    Driver Provider:"Microsoft"

                    Driver Version:"10.0.15063.0"

                    Ext. Family:"Not Available"

                    Family:"Not Available"

                    FPO:"Not Available"

                    INF:"cpu.inf"

                    INF Section:"IntelPPM_Inst.NT"

                    Install Date:"Not Available"

                    Last Error Code:"Not Available"

                    Level 1 Cache:"4 x 24 KB"

                    Level 2 Cache:"4 x 1024 KB"

                    Level 3 Cache:"0 MB"

                    Load:"9%"

                    Manufacturer:"GenuineIntel"

                    Model:"55"

                    Name:"Intel(R) Pentium(R) CPU  N3540  @ 2.16GHz"

                    Number of Cores:"4"

                    Number of Cores Enabled:"4"

                    Number of Logical Processors:"4"

                    Part Number:"Not Available"

                    Power Management Capabilities:"Not Available"

                    Power Management Supported:"No"

                    Processor ID:"BFEBFBFF00030678"

                    Revision:"14088"

                    Serial Number:"Not Available"

                    Service Name:"intelppm"

                    Status:"OK"

                    Stepping:"8"

                    Version:"Not Available"

          - "Storage"

               - "ST500LT012-1DG142"

                    Capablities:"Random Access, Supports Writing, SMART Notification"

                    Caption:"ST500LT012-1DG142"

                    Cylinder - Total:"60801"

                    Description:"Disk drive"

                    Driver:"Not Available"

                    Driver Date:"06/21/2006 12:00 AM"

                    Driver Version:"10.0.15063.0"

                    Error Code:"Device is working properly"

                    Firmware Revision:"1003YAM1"

                    Heads - Total:"255"

                    Index:"0"

                    INF:"disk.inf"

                    Install Date:"Not Available"

                    Interface Type:"IDE"

                    Manufacturer:"(Standard disk drives)"

                    Model:"ST500LT012-1DG142"

                    Name:"\\.\PHYSICALDRIVE0"

                    Partitions:"4"

                    Physical Sector Size:"4096"

                    PNP Device ID:"SCSI\DISK&VEN_&PROD_ST500LT012-1DG14\4&DFDB14E&0&000000"

                    Policies:"Read Retention Priority=EqualPriority, Write Retention Priority=EqualPriority, Scalar Prefetch=Not Available, Block Prefetch=Not Available"

                    Sectors - Per Track:"63"

                    Sectors - Total:"976768065"

                    Serial Number:"WBY798T1"

                    Size:"465.76 GB"

                    Size – Available:"297.98 GB"

                    SMART Attributes:"Self-Test: 101 minutes, OK, Short Self-Test: 2 minutes, OK"

                    Status:"OK"

                    Tracks - Per Cylinder:"255"

                    Tracks - Total:"15504255"

                    - "C:"

                         Availability:"Not Available"

                         Caption:"C:"

                         Compression Method:"Not Compressed"

                         Description:"Local Fixed Disk"

                         File System:"NTFS"

                         Name:"Windows"

                         Serial Number:"4CDF9531"

                         Size:"446.56 GB"

                         Size – Available:"295.88 GB"

                         Status:"Not Available"

                         Volume Dirty:"No"

                    - "D:"

                         Availability:"Not Available"

                         Caption:"D:"

                         Compression Method:"Not Compressed"

                         Description:"Local Fixed Disk"

                         File System:"NTFS"

                         Name:"RECOVERY"

                         Serial Number:"4A94D78E"

                         Size:"18.05 GB"

                         Size – Available:"2.12 GB"

                         Status:"Not Available"

                         Volume Dirty:"No"

                    - "SMART"

                         0x01  Raw Read Error Rate:146755464:"6"

                         0x03  Spin Up Time:0:"0"

                         0x04  Start/Stop Count:39:"0"

                         0x05  Reallocated Sector Count:0:"36"

                         0x07  Seek Error Rate:7989712:"30"

                         0x09  Power-On Hours:115:"0"

                         0x0A  Spin Retry Count:0:"97"

                         0x0C  Power Cycle Count:39:"0"

                         0xB7  SATA Downshift Count:0:"0"

                         0xB8  End-to-End Error Detection Count:0:"97"

                         0xBB  Uncorrectable Error Count:0:"0"

                         0xBC  Reported Command Timeouts:0:"0"

                         0xBD  High Fly Writes:0:"0"

                         0xBE  Temperature - Current:42° C:"0"

                         0xBE  Temperature - Highest:44° C:"0"

                         0xBE  Temperature - Lowest:29° C:"45"

                         0xBF  G-sense Rate/Servo Tracking:12:"0"

                         0xC0  Unsafe Shutdown Count:1:"0"

                         0xC1  Load/Unload Cycle Count:1502:"0"

                         0xC2  Internal Device Temperature:42° C:"0"

                         0xC4  Reallocation Count:0:"0"

                         0xC5  Current Pending Errors Count:0:"0"

                         0xC6  Uncorrectable Sector Count:0:"0"

                         0xC7  CRC Error Count:0:"0"

                         0xFE  Free Fall Protection:0:"0"

...#SSU#...