input from 19 analog sensors controlling approx. 27 switches
Hi guys, sorry for the beginner question but that's what I am. What can I do if my application calls for input from 19 sensors, say voltage and/or current sensors to control 27 switches, say FET's. Is...
View ArticleRe: Forgot Login password
just to be sure you dont have the same problem like described herePassword Problem
View ArticleRe: Adapt the Marlin 3D Printer Firmware to the board galileo gen2
Hi ocanen I have a couple of suggestions, take a look at the TTYUART libraries in: C:\arduino-1.5.3-Intel.1.0.4\hardware\arduino\x86\cores\arduinoAlso, take a look at this thread, you could try using...
View ArticleRe: Intel Graphics Media Accelerator Driver failed to install
Alex 1986, the reason why you are not able to install the graphics drivers could be because the systems manufacture, in this case Dell, is not letting you do it. Bear in mind that we provided generic...
View ArticleIntel Widi installation fail
Hi, I finished building PC and I am just updating drivers. When I tried to install the WiDi driver, or tried to use the WiDi update tool, it kept saying things like; "Your video hardware is not...
View ArticleRe: How to use poweroff-gpio.c(POWER_RESET_GPIO on Kconfig)
Hello maeda, I checked and there is documentation on this, and actually it is included in the package, you can find it here:...
View ArticleClik here to view.
Re: Forgot Login password
Hi 345ishaan; Have you tried with this process? Regards;CMata
View ArticleRe: Some Graphics 5200 architecture configuration problems
Thanks for the feedback Merlion. I’m going to provide this information to the corresponding department. Regarding your questions, I’m going to try to get that information for you.I’ll keep you posted.
View ArticleRe: About the startup of the edison
Hi SeanMA, The Edison will start the booting process automatically when it is powered up, regardless if the power is supplied by the USB or by an external power supply. It's not possible to avoid the...
View ArticleRe: gaileo gen 2 bricked after trying to use external power supply
Hi sergio85, As I understand from your post you want to power both the Galileo and the Roomba iRobot from the same battery supply you listed right? Take a look at this link...
View ArticleRe: NUC electric on the surface
Don't know which country you're in, however in the USA we have ground fault testers for about $10 in most hardware stores.
View ArticleWhat is the correct arduino board for use with Intel Edison Module? (Q)
Hi all, I bought the Intel Edison Module (without arduino board) and I am interested to buy a correct board (Arduino breakout) without incorporate the Intel Edison Module Could you facilitate me more...
View ArticleRe: Automatically check for wifi (and reconnect if necessary)
Hello mcabral, How are you pinging the internet addresses? Are you using the domain name or the IP address? Could you try pinging 173.194.113.16 and then www.google.com and tell us what happen?Also,...
View ArticleRe: Bios acces impossible
what did you try already? (different keyboard, different monitor, etc?) What specifically happens when you try to enter into bios?
View ArticleRe: Edison Ethernet.localIP() function
Diego,i use the std Arduino Ethernet library and it works quite well, that way my sketches work on the Galileos or Edison or UNO (with the Ethernet shield in this case of course) without or with very...
View ArticleClik here to view.
Re: Task 8 do_rootfs error
Hello wangfengshe, Taking a look at the last picture you attached I can see your missing a couple dependencies, pkgconfig and ldd, why don't you try adding them too? Peter.
View ArticleRe: Eclipse crashes after a couple of hours.
I am still waiting for an answer. I have one input to add to the behavior. I was using Eclipse with Edison the other day for a short time. I forgot to shut Eclipse down before going to dinner....
View ArticleRe: 10Gbps Thunderbolt networking for Windows 8.1 driver update? When?
http://thunderbolttechnology.net/sites/default/files/Thunderbolt%E2%84%A2%20Networking%20Bridging%20and%20Routing%20Inst…
View ArticleClik here to view.
Re: How best proceed with overheating i7-4790K?
Hello I have this system: -Motherboard Asus Maximus VII Hero-CPU Intel Core i7-4790K 4GHz 8MB Sk1150-Water Cooling Corsair Hydro Series H100i-GPU Asus GTX980-4GD5-Memory Kingston HyperX Savage...
View Article